Now I'm confused. I've ended up with some of the tracks showing a polygon clearance of 10 mil (in an object report) whilst others show 5 mil. After a little experimentation it seems that if I draw a track manually using the "signal" style (with "clearance" set to 10 mil and line width set to 10 mil) I get 10 mil spacing between the edge of my track and the polygon. If I autoroute using the same style I get 5 mil spacing between the edge of the track and the polygon. Should they be different, and if so, why?
On Wed, 2006-09-27 at 10:45 -0400, DJ Delorie wrote: > > Where is this default clearance set? Under Route Style there's just > > a clearance, set at 10 mil. > > That's it. Note that "clearance" is defined as "what you add to > thickness to get the cut thickness". I.e. for a 5 mil gap, you need a > 10 mil clearance. For a 6 mil gap, you'd need a 12 mil clearance, > etc. > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user