On Sun, 2007-04-01 at 05:48 -0500, Harold D. Skank wrote: [snip] > > > > Do you use these for related schematics? > > (Do you tend to have multiple pages from the same design?) > > I don't understand this question.
I what I was considering, is that if people use one gschem window with multiple pages open, are those pages all related to one circuit hierarchy level? Are they all some level of hierarchy within one design? Or, do people use a single gschem window for opening schematics which are un-related? The work on hierarchy I'm doing requires me to group schematic pages together into "circuit"s (or "sub-circuit"s - same difference). Since gschem and libgeda don't have this as an internal concept (yet), I am considering emulating this behaviour by making one gschem window correspond to one circuit, with its multiple pages in a flat list. This allows some testing work without major changes to the existing code. Thanks for your answers, Regards, -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user