Thanks for that info Steve. I'll definitely have a crack at repairing my 901's now. Way better than ~$700AU. -- Greg
On Fri, 2007-05-25 at 22:49 -0400, Steve Morss wrote: > Christian Treldal wrote: > > ons, 23 05 2007 kl. 23:44 -0400, skrev Darryl Gibson: > > > > <snip > > > >> Since we are OT, and on the subject of speakers, has anybody heard how > >> to recone a speaker? I've heard it can be done, but haven't found any > >> info. on it? > >> > > > > It can be done. I've done it several times with PA speakers, but not > > recently. Today the magic word are electronic crossovers;-) > > > > Here is a Danish guy who has a lot of experience. > > > > http://basrep.dk/ > > > > off course in a beautiful Danish > > > I haven't done a reconing, but the rubber gasket around the sides of > speaker cone often dries out and flakes away (on woofers). Ebay has > some vendors that will sell you a kit for $25 or so. What's involved is > scraping off the old gasket and gluing a new one in its place. It's not > that hard (takes an hour or two). The key is to make sure you use the > spacers provided to make sure the back of the cone (the part with the > coil), is centered around the magnet. > > Steve > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user -- Greg Cunningham <[EMAIL PROTECTED]> _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user