On Fri, 2007-07-27 at 15:22 -0600, armdeveloper wrote: > I created a "vendor resource file" with the appropriate drill sizes in > it. I used the file format in the pcb help html page. I commented out > the skips and the DRC stuff from the example. > > I load the file from the command in the File menu. I believe I enabled > the use of the file with the command in the Settings menu. I applied > the vendor drill map with the command in the Connects menu. > > However, when I view the Drill Summary Report in the info window, it > doesn't show the holes being converted to the vendor sizes.
This still doesn't work. Here is my vendor file. # Optional name of the vendor vendor = "APC" # units for dimensions in this file. # Allowed values: mil/inch/mm units = mil # drill table drillmap = { # When mapping drill sizes, select the nearest size # or always round up. Allowed values: up/nearest round = up # The list of vendor drill sizes. Units are as specified # above. 17 25 32 35 39 49 57 83 122 149 # optional section for skipping mapping of certain elements # based on reference designator, value, or description # this is useful for critical parts where you may not # want to change the drill size. Note that the strings # are regular expressions. #skips = { # {refdes "^J3$"} # Skip J3. # {refdes "J3"} # Skip anything with J3 as part of the refdes. # {refdes "^U[1-3]$" "^X.*"} # Skip U1, U2, U3, and anything starting with X. # {value "^JOHNSTECH_.*"} # Skip all Johnstech footprints based on the value of a part. # {descr "^AMP_MICTOR_767054_1$"} # Skip based on the description. #} } # If specified, this section will change the current DRC # settings for the design. Units are as specified above. #drc = { # copper_space = 7 # copper_width = 7 # silk_width = 10 # copper_overlap = 4 #} _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user