Steve Taylor wrote: > When I run the same command on the top level schematic, I get a long list > of "Duplicated references for every symbol in the underlying schematic, I > get another list for duplicate slot 1 of every symbol, and I get errors on > three of my inputs, listing the components to which they should have been > connected, saying the nets connect to only one pin.
I run drc2 on a similar schematic and get just minor warnings NOTE: Found pins without the 'pintype' attribute: U6:3 U6:4 U6:2 U6:5 U6:6 U6:1 U6:8 U6:7 U5 WARNING: Pin(s) with pintype 'input/output': U2:6 are connected by net 'GND' to pin(s) with pintype 'power': U2:7 U2:8 These I know I can ignore in my case. The offpage symbols have attribs device=none pintype=pas refdes=SENVDD1 pinnumber=1 Does your top schematic have symbols with pins that have the same name as refdes=SENVDD1 with pinlabel=SENVDD1? This is going to be a symbol you create. John Griessen -- Ecosensory Austin TX tinyOS devel on: ubuntu Linux; tinyOS v2.0.2; telosb ecosens1 _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user