> Ummmmmm, DJ, since you use this stackup, and it is the logical one, is > there any reason why this is not the default presented to the user > when PCB starts from scratch?
The default layer grouping is: component solder gnd power signal1 signal2 signal3 signal4 This makes sense for the most common case - two layer boards. If you're doing a four layer board, you can use it as-is or move the solder layer down to #4 giving comp/gnd/power/solder. The problem is that gsch2pcb is using an ancient layer stack which needs to be taken out back and shot. In my tutorials, I DO NOT let gsch2pcb define the layer stack. I have the user create the blank board beforehand, including size, stack, and grid, and only use gsch2pcb to add elements to it via pasting. _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user