Hi and thanks for the last helpful suggestion that got me over a hump. There are a few things that I am not clear on with symbols and footprints. Example built into the 7400.sym we have
net=Vcc:14 and net-Gnd:7. Yet when I click on the symbol on the schematic I do not see this. I am only curious as I wanted to change it to 3.3V:14 without editing and creating a new symbol. Second on a 9 pin sub min D I have pins 10 and 11 showing up as shorts since I have connected the mounting pin/studs to ground. Can I edit the symbol on the schematic with net=Gnd:10 etc without hitting a snag? The Net window was really good for de-snagging, I only had to select an offending signal to see the connections then click a component to be taken there. The only snag was after flipping the board to see the solder side it seems to go to the correct xy location for an un-flipped board. Thanks again for all the previous help Ian. _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user