Hi I just ran gsymcheck on a schematic for a power supply and got the following:
[EMAIL PROTECTED]:~/gaf/PFC_1Kw_Regulator$ gsymcheck -vv PFC_1kwRegulatorP1.sch gEDA/gsymcheck version 1.4.0.20080127 gEDA/symcheck comes with ABSOLUTELY NO WARRANTY; see COPYING for more details. This is free software, and you are welcome to redistribute it under certain conditions; please see the COPYING file for more details. Checking: /home/gary/gaf/PFC_1Kw_Regulator/PFC_1kwRegulatorP1.sch ERROR: Found wrongly attached attribute: [refdes=CONN101] ERROR: Found wrongly attached attribute: [device=MAINS_ENTRY] ERROR: Found wrongly attached attribute: [footprint=""] ERROR: Found wrongly attached attribute: [symversion=1.0] ERROR: Found wrongly attached attribute: [description=115V 60Hz ] ERROR: Found wrongly attached attribute: [device=CAPACITOR] ERROR: Found wrongly attached attribute: [refdes=C101] ERROR: Found wrongly attached attribute: [symversion=0.1] ERROR: Found wrongly attached attribute: [value=0.033 uf] ERROR: Found wrongly attached attribute: [description=Panasonic ECQM4333KZ 0.033 uf 400WVDC +/- 10%] ERROR: Found wrongly attached attribute: [footprint=""] ERROR: Found wrongly attached attribute: [device=FUSE] ERROR: Found wrongly attached attribute: [refdes=F101] ERROR: Found wrongly attached attribute: [symversion=0.1] ERROR: Found wrongly attached attribute: [value=15A] ERROR: Found wrongly attached attribute: [footprint=""] ERROR: Found wrongly attached attribute: [description=AGC Panel Mounted Holder] ERROR: Found wrongly attached attribute: [refdes=U101] ERROR: Found wrongly attached attribute: [device=DIODE-BRIDGE] ERROR: Found wrongly attached attribute: [numslots=0] ERROR: Found wrongly attached attribute: [description=GBPC1504 15A, 400PIV Bridge Recifier by Diodes Inc. Digikey P/N GBPC1504DI-ND $3.75/1] ERROR: Found wrongly attached attribute: [footprint=""] ERROR: Found wrongly attached attribute: [value=GBPC1504] There were 118 errors. All components errored out. Almost all of the symbols used are from the library. While this part of the circuit is to be chassis built, I don't think that should make a difference at this stage. I have no idea what is wrong. Gattrib looks fine. Thanks for any help in advance. Gary Roach _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user