On Apr 15, 2009, at 11:03 AM, Csanyi Pal wrote: > Hi, > > I'm making a small project of the PIC Programator. > I find the Schematic on the internet.. > > I have done already the Schematic. > The schematic can be find here on my webserver: > http://csanyi-pal.info/apache2-default/letoltes/gEDA_schematics/ > > I run on it gnetlist. Only one NOTE I get:
I assume with -g drc2 > > NOTE: Found pins without the 'pintype' attribute: > U101:1 U101:4 U101:8 U101:7 U101:2 U101:6 U101:5 U101:3 You can ignore this. You can ignore most complaints from drc2: its model of reality is that you are designing pure logic circuits using a single logic family. To the developers: why bludgeon newbies with the "need" to use a tool that requires deep understanding of its limitations to be at all useful? It's a tool for experts: its messages must be treated with enormous skepticism. > > and this is the LM555 Timer. > > So, I don't know exactly all the pintypes of the LM555 but mayhep > they are these: > > pin 1 GND: pintype: pwr > pin 2 TRIG: pintype: in (?) > pin 4 RESET: pintype: in (?) > pin 8 VCC: pintype: pwr > > pin 3 OUT: pintype: out > pin 5 CTRL: pintype: out (?) > pin 6 THRES: pintype: out (?) > pin 7 DISC: pintype: oc (?) > > Is this true? When in doubt, use "pas". > > I think I need this because I want later to simulate this circuit > design.. Nope. You don't need pintype at all, unless you want to suppress drc2's whining. > I must to determine diodes D111 and D112 so that the Vpp be > max. +13 V. > > -- > Regards, Paul Csanyi > http://www.freewebs.com/csanyi-pal/index.htm > > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > John Doty Noqsi Aerospace, Ltd. http://www.noqsi.com/ j...@noqsi.com _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user