Well, after changing the grid setting to 0.1 the pitch is consistent.. My problem my be with the chip sample I have. When we put the ic on the finished board the pins don't line up. For the most part they do but as you go along from one end of the chip to the other the pins don't line up. They're very close but almost half a pin to a pin off. I have two samples and tomorrow when I have help I'll check both chips. Any thought?
On Thu, Jun 4, 2009 at 5:27 PM, DJ Delorie <[1...@delorie.com> wrote: Screen shot? I know that pixel artifacts can cause individual pins to look funny, but that's just visual - not something inherent to the board. _______________________________________________ geda-user mailing list [2]geda-u...@moria.seul.org [3]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user References 1. mailto:d...@delorie.com 2. mailto:geda-user@moria.seul.org 3. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user