This is a not too serious, but strange error -- maybe solved in 1.5.x? I tried to generate a BOM for my DSO board. This has some Dual OpAmps (slotted) with separate power symbols.
I have reduced the problem to a minimal schematic, called test5.sch. If I delete in this schematic the Power symbols 502 and 503 and replace them with a copy of 501 and renumber manually again to 502 and 503 all works fine: ste...@amd64-x2 ~ $ cd bomproblems/ ste...@amd64-x2 ~/bomproblems $ ls -l total 24 -rw-r--r-- 1 stefan stefan 1209 Sep 22 16:31 OpAmp-Dual-1.sym -rw-r--r-- 1 stefan stefan 775 Sep 22 16:31 OpAmp-Dual-Pwr-1.sym -rw-r--r-- 1 stefan stefan 24 Sep 22 16:30 gafrc -rw-r--r-- 1 stefan stefan 3105 Sep 22 16:30 test5.sch -rw-r--r-- 1 stefan stefan 3105 Sep 22 16:30 test8.sch -rw-r--r-- 1 stefan stefan 3105 Sep 22 16:30 test9.sch ste...@amd64-x2 ~/bomproblems $ gnetlist -g partslist3 -o test.bom test5.sch && cat test.bom gEDA/gnetlist version 1.4.3.20081231 gEDA/gnetlist comes with ABSOLUTELY NO WARRANTY; see COPYING for more details. This is free software, and you are welcome to redistribute it under certain conditions; please see the COPYING file for more details. Remember to check that your schematic has no errors using the drc2 backend. You can do it running 'gnetlist -g drc2 your_schematic.sch -o drc_output.txt' and seeing the contents of the file drc_output.txt. Loading schematic [/home/stefan/bomproblems/test5.sch] .START ..device value footprint quantity refdes OpAmp Dual LMV393 MSOP-65P-490L1-8N__ADI_RM-8_Package 1 U501 OpAmp Dual OPA2705 MSOP-65P-490L1-8N__ADI_RM-8_Package 1 U500 OpAmp Dual unknown MSOP-65P-490L1-8N__ADI_RM-8_Package 2 U502 U503 .END ste...@amd64-x2 ~/bomproblems $ gnetlist -g partslist3 -o test.bom test8.sch && cat test.bom gEDA/gnetlist version 1.4.3.20081231 [...] .START ..device value footprint quantity refdes OpAmp Dual LMV393 MSOP-65P-490L1-8N__ADI_RM-8_Package 2 U501 U503 OpAmp Dual OPA2705 MSOP-65P-490L1-8N__ADI_RM-8_Package 2 U500 U502 .END ste...@amd64-x2 ~/bomproblems $ gnetlist -g partslist3 -o test.bom test9.sch && cat test.bom gEDA/gnetlist version 1.4.3.20081231 [...] .START ..device value footprint quantity refdes OpAmp Dual LMV393 MSOP-65P-490L1-8N__ADI_RM-8_Package 2 U501 U503 OpAmp Dual OPA2705 MSOP-65P-490L1-8N__ADI_RM-8_Package 2 U500 U502 .END I can see no significant differences between file test5.sch which makes problems and files 8 and 9 which are fine. May it be only the position where the symbols are stored in the schematics? The files are available here: http://www.ssalewski.de/tmp/bomproblems.tar Best regards Stefan Salewski _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user