I've not used these chips. But on the subject of ethernet, the chip I do use is the Wiznet W5100, it saves all the effort of having to have your own TCP/IP stack since it's offloaded in hardware. It's a very flexible chip, can be accessed via a full bus (14 bit address bus, 8 bit data bus), or by "automatic increment" - two bit addressing with an 8 bit data bus, or using SPI. You can take or leave as much of the TCP offload as you want - you can use it at the MAC level, IP level, or use the whole stack. I've found them to be excellent chips for adding ethernet to 8 bit projects.
There's also a more capable W5300 as well, which can support more simultaneous TCP streams, and has both an 8 and 16 bit data bus. The only thing that might put people off is that it uses a 0.4mm pitch LQFP, I find going from 0.5mm to 0.4mm for home made PCBs increases the difficulty by an order of magnitude using toner transfer (I thought it wouldn't be that much harder!) Of course, with a factory made PCB it's not really any harder than a 0.5mm TQFP or similar. El 24-nov-09, a las 18:55, DJ Delorie escribió: > > Digikey has the new KSZ8851 series... multiple bus options > (spi/8/16/32), built-in PHY, only 85 milliamps, under $10: > > http://www.micrel.com/page.do?page=product-info/embedded_control.jsp > > Anyone know anything about these chips? They look like I should be > switching to them :-) > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user