On Wed, 2010-03-03 at 11:06 -0500, Jim wrote: > > > > Land_pattern_xxx is right, see link at bottom of this page: > > > > http://www.ssalewski.de/SFG.html.en > > > I think I followed that pattern but it didn't work. I see you have a > generator can it do a 4 row DIP? > Something with a foot print like: > > o o o o o o o o o o o o > o o o o o o o o o o o o > > > o o o o o o o o o o o o > o o o o o o o o o o o o > > ?
No problem with minimal manual tuning. Make two DIP parts, inner and outer rows. Copy the pins from one element into the other and rename the pins (number, name), all with a text editor. Should be easy -- I may do it for you if you give me all necessary data. I have never seen such an layout. If you can post a link to a datasheet of such a device, and if it is not too exotic, then I will extend my generator script for that shape. Best regards Stefan _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user