Hello, I'm trying to boot an image of latest Gentoo, it goes on terminal as further as it is pointing down:
[ 0.907245] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.909969] scsi 0:0:1:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5 [ 0.910335] sd 0:0:1:0: [sdb] 4177920 512-byte logical blocks: (2.14 GB/1.99 GiB) [ 0.910382] sd 0:0:1:0: [sdb] Write Protect is off [ 0.910414] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 0.910879] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.911244] sd 0:0:1:0: [sdb] Attached SCSI disk user@nixDEV:~/gem5$ util/term/m5term 3456 Once it get into trying to load a /dev/sdb it crashes the system all the time, also below it is the output of my gem5 running output when the crash strikes, I only have one image file, I also contain the linux-bigswap2.img inside the directory of disks/, and I set the M5_PATH, all of this inside a uBuntu 17.10 box: ./build/X86_MOESI_AMD_Base/gem5.opt configs/example/fs.py --caches --l2cache --smt --kernel=/home/user/gem5/binaries/vmlinuX-4.9.76-gentoo-r1-my-gem5 --disk-image=/home/user/gem5/disks/image-gentoo-gem5.img --mem-type=DDR4_2400_16x4 --mem-size=2GB --mem-ranks=4 Global frequency set at 1000000000000 ticks per second warn: DRAM device capacity (65536 Mbytes) does not match the address range assigned (2048 Mbytes) info: kernel located at: /home/user/gem5/binaries/vmlinuX-4.9.76-gentoo-r1-micron-gem5 Listening for com_1 connection on port 3456 0: rtc: Real-time clock set to Sun Jan 1 00:00:00 2012 0: system.remote_gdb: listening for remote gdb on port 7000 warn: Reading current count from inactive timer. **** REAL SIMULATION **** info: Entering event queue @ 0. Starting simulation... warn: x86 cpuid family 0x0000: unimplemented function 6 warn: x86 cpuid family 0x0000: unimplemented function 6 warn: x86 cpuid family 0x0000: unimplemented function 6 warn: instruction 'fninit' unimplemented warn: Don't know what interrupt to clear for console. 27803416000: system.pc.com_1.device: attach terminal 0 warn: x86 cpuid family 0x0000: unimplemented function 6 warn: x86 cpuid family 0x0000: unimplemented function 6 warn: x86 cpuid family 0x0000: unimplemented function 6 warn: Write to unknown i8042 (keyboard controller) command port. hack: Assuming logical destinations are 1 << id. warn: Tried to clear PCI interrupt 14 panic: Resetting mouse wrap mode unimplemented. Memory Usage: 2651052 KBytes Program aborted at tick 1220740343000 --- BEGIN LIBC BACKTRACE --- ./build/X86_MOESI_AMD_Base/gem5.opt(_Z15print_backtracev+0x2c)[0x561c376ff10c] ./build/X86_MOESI_AMD_Base/gem5.opt(_Z12abortHandleri+0x4a)[0x561c37714aea] /lib/x86_64-linux-gnu/libpthread.so.0(+0x13150)[0x7fd761e15150] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xcb)[0x7fd7604470bb] /lib/x86_64-linux-gnu/libc.so.6(abort+0x16d)[0x7fd760448f5d] ./build/X86_MOESI_AMD_Base/gem5.opt(+0x3f826f)[0x561c3694e26f] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN6X86ISA8PS2Mouse11processDataEh+0x485)[0x561c370f9b05] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN6X86ISA5I80425writeEP6Packet+0x564)[0x561c370fbbc4] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN7PioPort10recvAtomicEP6Packet+0x6e)[0x561c376a697e] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN15NoncoherentXBar10recvAtomicEP6Packets+0x185)[0x561c37184495] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN6Bridge15BridgeSlavePort10recvAtomicEP6Packet+0x36)[0x561c3715bf36] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN12CoherentXBar10recvAtomicEP6Packets+0x53a)[0x561c371674da] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN5Cache10recvAtomicEP6Packet+0x44d)[0x561c377b55ad] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN12CoherentXBar10recvAtomicEP6Packets+0x53a)[0x561c371674da] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN5Cache10recvAtomicEP6Packet+0x44d)[0x561c377b55ad] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN15AtomicSimpleCPU8writeMemEPhjm5FlagsImEPm+0x53e)[0x561c3722ee0e] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN17SimpleExecContext8writeMemEPhjm5FlagsImEPm+0x29)[0x561c3723bf79] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZNK10X86ISAInst2St7executeEP11ExecContextPN5Trace10InstRecordE+0x275)[0x561c36f307c5] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN15AtomicSimpleCPU4tickEv+0x3a1)[0x561c3722de11] ./build/X86_MOESI_AMD_Base/gem5.opt(_ZN10EventQueue10serviceOneEv+0xd9)[0x561c37706d19] ./build/X86_MOESI_AMD_Base/gem5.opt(_Z9doSimLoopP10EventQueue+0x87)[0x561c377222d7] ./build/X86_MOESI_AMD_Base/gem5.opt(_Z8simulatem+0xcaa)[0x561c3772331a] ./build/X86_MOESI_AMD_Base/gem5.opt(+0x108e48b)[0x561c375e448b] ./build/X86_MOESI_AMD_Base/gem5.opt(+0xdee9b9)[0x561c373449b9] /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x6e54)[0x7fd7620d57e4] /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7fd7621ffb88] /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x5bf0)[0x7fd7620d4580] /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7fd7621ffb88] /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x5bf0)[0x7fd7620d4580] /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7fd7621ffb88] /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x5bf0)[0x7fd7620d4580] /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7fd7621ffb88] --- END LIBC BACKTRACE --- Aborted (core dumped) Does anyone knows what should I do to fix that ? Regards, Luis Vitorio Cargnini, Ph.D. Sr. Systems Architect _______________________________________________ gem5-users mailing list gem5-users@gem5.org http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users