Hi! I've just installed lm-sensors to peek at my motherboard. I've got the following informations. I don't understand everything but I don't like the ALARM messages... Can I trust those informations? Should I call the firemen? And I'm specially worried about the +224.4°C (limit +120°). After a few tries, all infomations seem pretty static, only the temp2 changes a bit.
as99127f-i2c-0-2d Adapter: SMBus Via Pro adapter at e800 Algorithm: Non-I2C SMBus adapter VCore 1: +1.84 V (min = +1.76 V, max = +2.14 V) VCore 2: +0.09 V (min = +1.76 V, max = +2.14 V) ALARM +3.3V: +3.26 V (min = +2.97 V, max = +3.63 V) +5V: +4.80 V (min = +4.50 V, max = +5.48 V) +12V: +12.27 V (min = +10.79 V, max = +13.11 V) -12V: -7.55 V (min = -15.06 V, max = -12.32 V) ALARM -5V: -2.66 V (min = -5.48 V, max = -4.50 V) ALARM fan1: 3901 RPM (min = 3000 RPM, div = 2) fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM temp1: +33°C (limit = +60°C) temp2: +69.0°C (limit = +120°C, hysteresis = +100°C) (beep) temp3: +224.4°C (limit = +120°C, hysteresis = +100°C) vid: +1.950 V alarms: beep_enable: Sound alarm enabled -- mathieu perrenoud -- [EMAIL PROTECTED] mailing list