Hello!

Blah! I have recompiled XFree - the same problem with glxinfo and
glxgears! However, `glxinfo -i` works and shows that there is no direct
rendering.

On Sun, Oct 19, 2003 at 12:14:51AM +0300, Andrew Kirilenko wrote:
> Hello!
> 
> I have got new PC with ATI Radeon 9100 and Gigabyte's MB based on
> KT400A. I'd like to get hardware opengl. The very first thing, I have
> tried is using agpgart and xfree-drm on 2.4 kernel. After some time
> fscking with it and googling, I have found that agpgart in 2.4 doesn't
> support version 3 of AGP (or something like this), and it's impossible
> to tell KT400A to not use this AGP3 with my videocard, and only solution
> is to use 2.6 kernel. OK. I have emerged developemt-sources (test6 at
> the moment), compiled them and booted into without any problems. The
> first problem, I have noticed that there is no DMA (and `hdparm /dev/hda
> -d 1` can't set it). Blah. OK. Maybe I have missed something when
> configured kernel, but this is not so important at the moment. Then I
> have tried `modprobe agpgart` and it was successfull - my radeon was 
> detected correctly. After this I have started `emerge xfree-drm` and it
> simply failed (it supports nothing but 2.4 and patch for 2.5 is
> commented in the ebuild and missing in xfree-drm/files). OK. No problem.
> I made `make menuconfig` again and enabled DRM provided with kernel.
> After recompiling and rebooting I have inserted all necessary modules
> and `startx`. OK. X was started without problems. Superb! I started
> `glxinfo` and simply got segfault (and the same with `glxgears`).
> 
> I'm wondering if DRM from kernel is suitable for my XFree version (4.3)?
> Or it's possible to get xfree-drm for 2.6 somewhere? Or I need to boot
> 2.6 and recompile X (`X -version` shows "Build Operating System: Linux
> 2.4.19-4GB i686 [ELF]")? Or something else? I'm here, waiting for
> suggestions :)
> 
> PS. Sorry for such looooooong story and my "not perfect" english.
> 
> Best regards,
> Andrew.
> 

Best regards,
Andrew.

--
[EMAIL PROTECTED] mailing list

Reply via email to