No, I was not aware of win32codecs divx4linux until now, so I just emerged
them.
Still no luck with mplayer, xine or vlc.
I match my settings for xine as seen in /etc/fstab
/dev/cdroms/cdrom0 /mnt/cdrom
(I tried both the first and 2nd entry) and get the following errors:
bash-2.05b$ xine
This is xine (X11 gui) - a free video player v0.9.21
(c) 2000-2003 by G. Bartsch and the xine project team.
Built with xine library 1.0.0 (1-beta12)
Found xine library version: 1.0.0 (1-beta12).
XServer Vendor: Gentoo Linux (XFree86 4.3.0, revision r2). Release: 40300000,
Protocol Version: 11, Revision: 0,
Available Screen(s): 1, using 0
Depth: 24.
XShmQueryVersion: 1.1.
-[ xiTK version 0.10.3 ]-
-[ xiTK will use XShm ]-
-[ WM type: (EWMH) KWIN {KWin} ]-
Display is not using Xinerama.
main: probing <aadxr3> video output plugin
load_plugins: failed to load video output plugin <aadxr3>
main: probing <dxr3> video output plugin
load_plugins: failed to load video output plugin <dxr3>
main: probing <xv> video output plugin
video_out_xv: Xv extension is present but I couldn't find a usable yuv12 port.
Looks like your graphics hardware driver doesn't support Xv?!
load_plugins: failed to load video output plugin <xv>
main: probing <SyncFB> video output plugin
video_out_syncfb: aborting. (unable to open syncfb device "/dev/syncfb")
load_plugins: failed to load video output plugin <SyncFB>
main: probing <xshm> video output plugin
main: probing <oss> audio output plugin
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
xine_interface: unknown param 10
video_out_xshm: tried to get unsupported property 2
video_out_xshm: tried to set unsupported property 2
video_out_xshm: tried to get unsupported property 2
demux_mpeg_block: error! 02 00 02 (should be 0x000001)
demux_mpeg_block: error! 01 00 02 (should be 0x000001)
demux_mpeg_block: error! 06 00 02 (should be 0x000001)
demux_mpeg_block: error! 05 00 02 (should be 0x000001)
demux_mpeg_block: error! 07 00 02 (should be 0x000001)
demux_mpeg_block: error! 04 00 02 (should be 0x000001)
demux_mpeg_block: error! 02 00 02 (should be 0x000001)
demux_mpeg_block: error! 00 00 00 (should be 0x000001)
demux_mpeg_block: error! 00 00 00 (should be 0x000001)
demux_mpeg_block: error! 00 00 00 (should be 0x000001)
demux_mpeg_block: error! 00 00 00 (should be 0x000001)
demux_mpeg_block: error! 00 00 00 (should be 0x000001)
demux_mpeg_block: error! 00 00 00 (should be 0x000001)
demux_mpeg_block: error! 00 00 00 (should be 0x000001)
demux_mpeg_block: error! 02 00 02 (should be 0x000001)
input_vcd: error in CDROMREADRAW
demux_mpeg_block: error! 02 00 02 (should be 0x000001)
input_vcd: error in CDROMREADRAW
With mplayer I get:
bash-2.05b$ mplayer -vcd 1
MPlayer 0.92-3.2.3 (C) 2000-2003 MPlayer Team
CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP
Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
MMX supported but disabled
MMX2 supported but disabled
SSE supported but disabled
3DNow supported but disabled
3DNowExt supported but disabled
CPUflags: MMX: 0 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions:
Reading config file /usr/share/mplayer/mplayer.conf
Reading config file /home/beharri/.mplayer/config
Reading /home/beharri/.mplayer/codecs.conf: can't open
'/home/beharri/.mplayer/codecs.conf': No such file or directory
Reading /usr/share/mplayer/codecs.conf: 50 audio & 136 video codecs
font: can't open file: /home/beharri/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
Using usleep() timing
Can't open input config file /home/beharri/.mplayer/input.conf: No such file
or directory
Input config file /usr/share/mplayer/input.conf parsed: 52 binds
Playing VCD track 1
track 01: adr=1 ctrl=6 format=2 00:02:00 mode: 232
track 02: adr=1 ctrl=5 format=2 00:08:62 mode: 232
track 03: adr=1 ctrl=6 format=2 02:44:66 mode: 232
track 04: adr=1 ctrl=5 format=2 02:51:53 mode: 232
Cache fill: 9.98% (836640 bytes) RAWDV file format detected.
==========================================================================
Opening audio decoder: [libdv] Raw DV Audio Decoder
Unknown/missing audio format -> no sound
ADecoder init failed :(
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
Unknown/missing audio format -> no sound
ADecoder init failed :(
*** Try to upgrade /home/beharri/.mplayer/codecs.conf from etc/codecs.conf
*** If it still does not work, read DOCS/codecs.html!
Cannot find codec for audio format 0x56444152.
==========================================================================
vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local
display)
Xv: could not grab port 67
Could not find free Xvideo port - maybe another process is already using it.
Close all video applications, and try again. If that does not help,
see 'mplayer -vo help' for other (non-xv) video out drivers.
==========================================================================
Opening video decoder: [dshow] DirectShow video codecs
Decoder supports the following YUV formats: YUY2 UYVY
Decoder is capable of YUV output (flags 0x9)
VDec: vo config request - 720 x 480 (preferred csp: Packed YUY2)
[PP] Using codec's postprocessing, max q = 4.
VDec: using BGR 24-bit as output csp (no 2)
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 720x480 => 720x480 BGR 24-bit
SwScaler: using unscaled BGR 24-bit -> BGR 32-bit special converter
Selected video codec: [qdv] vfm:dshow (Sony Digital Video (DV))
==========================================================================
Audio: no sound
Starting playback...
V: 0.2 6 0% 0% 0.0% 0 0 0%
Total Unfree 1146 bytes cnt 13 [(nil),0]
Exiting... (End of file)
On Monday 20 October 2003 06:02, Eric Marchionni wrote:
> Bruce E. Harris wrote:
> >mplayer is getting closer then and thing else I tired. It starts then
> > fails with these errors. I noticed I do not have a conf file, and not
> > sure how to create it, and cant find DOCS/codecs.html!
>
> first of all: did you run an "emerge win32codecs divx4linux" ?
> i prefer xine. run xine, then simply choose VCD from the gui. that's it!
> make sure in settings => input => path to your local vcd device file is
> set right.
>
> hth
> eric
>
>
> --
> [EMAIL PROTECTED] mailing list
--
[EMAIL PROTECTED] mailing list
