You'll have use hdx=ide-scsi in grub for gentoo, just like you do for suse.

On 16:34 Mon 24 Nov, Bruce E. Harris wrote:
> I have 3 IBM SCSI HDDs and no IDE HDDs.
> My CD is is a Toshiba DVD-R/RW combo. Under both
> SuSE and Gentoo, it mounts CDs just fine, DVDs work
> much better on Gentoo, and under SuSE I do use 
> dev=2,0,0 and it burns just fine.
> 
> I am using Grub in SuSE to boot either Gentoo or SuSE.
> The SuSE and Gentoo boot follows: 
> 
> title SuSE 8.1
>     kernel (hd0,0)/vmlinuz root=/dev/sda2  hda=ide-scsi apm=off acpi=off
>     initrd (hd0,0)/initrd
> 
> title Gentoo
>     kernel (hd2,0)/boot/kernel-2.4.20-gentoo-r7 root=/dev/sdc3
>     initrd (hd2,0)/boot/initrd-2.4.20-gentoo-r7
> 
> 
> On Monday 24 November 2003 04:08 pm, Barry Marler wrote:
> > Is the IBM your burner?  You're not trying to use dev=2,0,0, are you?
> >
> > On 12:58 Mon 24 Nov, Luke Davison wrote:
> > > Bruce,
> > >
> > > Are you setting hdx=ide-scsi upon boot? For instance, in my
> > > /boot/grub/grub.conf:
> > >
> > > kernel /bzImage-2.4.20-r8 root=/dev/sda3 hda=ide-scsi
> > >
> > > Regards,
> > > Luke
> > >
> > > -----Original Message-----
> > > From: Bruce E. Harris [mailto:[EMAIL PROTECTED]
> > > Sent: Monday, November 24, 2003 1:02 PM
> > > To: Gentoo Maillinglist
> > > Subject: [gentoo-user] cdrecord problems
> > >
> > >
> > > I have cdrecord working under SuSE Linux 8.1 just fine, but having
> > > problems with Gentoo.
> > >
> > > When I run cdrecord -scanbus
> > >
> > > I get this error:
> > >
> > > bash-2.05b$ cdrecord -scanbus
> > > Cdrecord 2.01a14 (i686-pc-linux-gnu) Copyright (C) 1995-2003 J?rg
> > > Schilling Linux sg driver version: 3.1.24
> > > Using libscg version 'schily-0.7'
> > > scsibus0:
> > >         0,0,0     0) 'IBM     ' 'IC35L036UWD210-0' 'S5BS' Disk
> > >         0,1,0     1) 'IBM     ' 'IC35L036UWD210-0' 'S5BS' Disk
> > >         0,2,0     2) 'IBM     ' 'DDRS-39130D     ' 'DC1B' Disk
> > >         0,3,0     3) *
> > >         0,4,0     4) *
> > >         0,5,0     5) *
> > >         0,6,0     6) *
> > >         0,7,0     7) *
> > >
> > > The cd is not seen
> > >
> > > Under SuSE I use this command and it burns cd's just fine;
> > >
> > > cdrecord dev=2,0,0 fs=4096k -v -eject -pad -useinfo -dao -data
> > > /gentoo/((iso
> > >
> > > mage))
> > >
> > > Any ideas?
> > >
> > > TIA
> > >
> > > --
> > > Best Regards,
> > >
> > > Bruce
> > >
> > >
> > > --
> > > [EMAIL PROTECTED] mailing list
> 
> -- 
> Best Regards,
> 
> Bruce
> 
> "They that can give up essential liberty to obtain a little temporary safety 
> deserve neither liberty nor safety". Benjamin Franklin
> 
> 
> 
> --
> [EMAIL PROTECTED] mailing list
> 

-- 
Barry Marler
Information Analyst II
Center for Applied Genetic Technologies
University of Georgia
Athens, GA 
USA

--
[EMAIL PROTECTED] mailing list

Reply via email to