Hello. I have an Epson Stylus Color 777 conncected to an USB port. The kernel modules uhci_hcd, usblp and usbcore are loaded. When testint the connection to the printer with the comand 'escputil --raw-device /dev/usb/lp0 --status' I get "Read from printer timed out" messages.
What am I missing here? I am running gentoo-dev-sources-2.6.1 with an AMD Athlon XP 2000 processor. I have in /proc/bus/usb/devices: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b8 ProdID=0005 Rev= 1.00 S: Manufacturer=EPSON S: Product=USB Printer S: SerialNumber=HR0010103071807550 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Regards. Romildo -- [EMAIL PROTECTED] mailing list