Hello,
I have a new MSI FSR Delta (VIA_KT880) and AMD Sempron 2600+, and now after
loading thermal module I do not have CPU temperature in /proc/ :-(
Question:
1. Is this an ACPI fault that my CPU is not compatible in kernel?
Result from /proc/:
./proc/acpi/processor/CPU1. # v
razem 0
dr-xr-xr-x 2 root root 0 sty 11 21:54 .
dr-xr-xr-x 3 root root 0 sty 11 21:54 ..
-r--r--r-- 1 root root 0 sty 11 21:54 info
-rw-r--r-- 1 root root 0 sty 11 21:54 limit
-r--r--r-- 1 root root 0 sty 11 21:54 power
-rw-r--r-- 1 root root 0 sty 11 21:54 throttling
./proc/acpi/processor/CPU1. # cat *
processor id: 0
acpi id: 1
bus mastering control: no
power management: no
throttling control: no
limit interface: no
<not supported>
active state: C1
default state: C1
max_cstate: C3
bus master activity: 00000000
states:
*C1: promotion[--] demotion[--] latency[000] usage[00000000]
C2: <not supported>
C3: <not supported>
<not supported>
./proc/acpi/processor/CPU1. # uname -a
Linux uran 2.6.10-gentoo-r3 #2 Sat Jan 8 20:12:30 CET 2005 i686 AMD Sempron(tm)
2600+ AuthenticAMD GNU/Linux
./proc/acpi/processor/CPU1. # lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0269
0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1269
0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2269
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3269
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4269
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7269
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6120/VT6121/VT6122
Gigabit Ethernet Adapter (rev 11)
0000:00:0f.0 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800
South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If
[Radeon 9000] (rev 01)
0000:01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon
9000] (Secondary) (rev 01)
./proc/acpi/processor/CPU1. #
No i mam tutaj: "throttling control" z wunikiem "no", także chyba sobie
odpowiedziałem?
Now I have "throttling control" with issue "no", so ACPI is an author of that
mistake?
Take care.
P.S. I am using setpci to cool my CPU. Like this:
.~. $ cat /etc/conf.d/local.start | grep -v ^# | grep setpci
setpci -H1 -s 0:0.0 82=$(printf %x $((0x$(setpci -H1 -s 0:0.0 82) | 0x80)))
setpci -H1 -s 0:0.0 85=$(printf %x $((0x$(setpci -H1 -s 0:0.0 85) | 0x02)))
.~. $
--
### Damian Kołkowski (dEiMoS) ## http://kolkowski.no-ip.org/ ###
# echo teb.cv-ba.vxfjbxybx.anvznq | rot13 | rev | sed s/\\./@/ #
--
gentoo-user@gentoo.org mailing list
