As far as lot to lot validation that's all we do. Use same control and compare 
both.  

Now validating a new detection kit is a whole different story.  Here I just 
made a checklist of all the antibodies we do and had the doc sign off on each 
stain with the new kit.  
If you want you can do a slide of each with same control one with the iview and 
one with the ultraview.
All depends on how your doc wants to validate it.

Vanessa 

-----Original Message-----
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Vickroy, Jim
Sent: Tuesday, September 25, 2012 1:58 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Changing from Ventana IView Detection Kit to Ventana 
Ultraview kit

We are trying to decide how to validate our stains when we switch from 
Ventana's IView kit to their Ultraview Kit.

I have reviewed the CAP question on this and find the following wording:

The performance of new lots of antibody and detection system reagents are 
compared with old lots before or concurrently with being placed into service.
                Note:   Parallel staining is required to control for variables 
such as disparity in the lots of detection reagents or instrument function.  
New lots of primary and detection reagents must be
                               compared to the previous lot using an 
appropriate panel of control tissues.   This comparison must be made on slides 
cut from the same control block.

Evidence:   Written procedure and records of verification of new reagent lots.

For new lots of antibodies we have been running the new lot and comparing with 
the previous lot by reviewing the control slide from the old lot to the new lot.

Is this sufficient?   Wording that bothers me is "appropriate panel of tissues"

Thanks for your input.

James Vickroy BS, HT(ASCP)

Surgical  and Autopsy Pathology Technical Supervisor Memorial Medical Center
217-788-4046


________________________________
This message (including any attachments) contains confidential information 
intended for a specific individual and purpose, and is protected by law. If you 
are not the intended recipient, you should delete this message. Any disclosure, 
copying, or distribution of this message, or the taking of any action based on 
it, is strictly prohibited.
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

Reply via email to