Well, Rich, the Hitachi is out the door already.

I hope the computer room manager would have a picture of
the old machine configuration showing how the devices are
connected to the Hitachi. With that, the installer can put
a basic IOCP on the MP2003-204's storage element. 

As I know of on the Hitachi:

DASD are on 200-23F
Tapes are on 320 to 32F. 

Good luck to me!

Regards,

...Roland

--- Rich Smrcina <[EMAIL PROTECTED]> wrote:

> That is going to be next to impossible without knowing
> the CHPID numbers 
> and device numbers that they need.  It's time to
> reconnect the Hitachi box.
> 
> Roland P. Chung wrote:
> > Hello Listers, please help! I've been parachuted into
> the
> > middle of this. *SIGH*
> > 
> > The client is migrating from a Hitachi EX-22 to a
> > MP2003-204. The operating system is VM/ESA 2.30. Before
> > they took down the old system , we did not make a copy
> of
> > the IOCP. The only thing we've managed to do is DDR
> copied
> > all 64 3390-3 DASDs.
> > 
> > Could anyone has an IOCP similiar to the MP2003 system
> that
> > I can borrow. The new system's configuration is as
> follow:
> > 
> > CPU
> > 
> > 15  CEC/Cage Airflow cards             (0012)
> > 1   External HMC/SE                    (0015)
> > 1   204 1-Way Processor                (0603)
> > 1   No Crypto Hardware                 (0808)
> > 2   4 port parallel cards              (2304)
> > 2   ESCON Channel                      (2313)
> > 1   FIBBAC Card                        (2338)
> > 1   1024 MN Memory Card                (3024)
> > 1   Token Ring                         (5201)
> > 1   Small Console Display              (6090)
> > 1   4.8M 3 Phase - US                  (8887)
> > 1   Northern Hemisphere                (9930)
> > 
> > Plus devices from the old system
> > 
> > IBM 3490 Tape Systems
> >  3490E A10 Controller
> >  3490E B40 w/4 Tape Transports w/Autoloaders
> >  3490E B20 w/2 Tape Transports w/Autoloaders
> > 
> > IBM 4245/12 Printer   
> > 
> > IBM 3174/1L Communications Controller (coax
> connections)
> > 
> > IBM 3172/3 Communications Controller (Ethernet
> connections)
> > 
> > DASD
> > 
> > 4   36.4gb 8 paks             (2123)
> > 4   ESCON Channels
> > 8   GB cache
> > * to be configured as 3390-3
> > 
> > Thanks a lot in advance.
> > 
> > 
> > 
> > With best regards,
> > 
> > ...Roland Chung
> > Senior Technical Specialist (S/390,VM/VSE,DB2/VSE&VM)
> > MAXC Consultants Inc.
> > Voice/Fax: 416-469-3280 (If busy, call: 416-469-2268)
> > 197 Hastings Ave., Toronto, Ontario, Canada. M4L 2L6
> > 
> > ** Life is short. Stop once in a while and smell the
> roses. **
> > 
> 
> -- 
> Rich Smrcina
> VM Assist, Inc.
> Main: (262)392-2026
> Cell: (414)491-6001
> Ans Service:  (360)715-2467
> rich.smrcina at vmassist.com
> 
> Catch the WAVV!  http://www.wavv.org
> WAVV 2007 - Green Bay, WI - May 18-22, 2007
> 


With best regards,

...Roland Chung
Senior Technical Specialist (S/390,VM/VSE,DB2/VSE&VM)
MAXC Consultants Inc.
Voice/Fax: 416-469-3280 (If busy, call: 416-469-2268)
197 Hastings Ave., Toronto, Ontario, Canada. M4L 2L6

** Life is short. Stop once in a while and smell the roses. **

Reply via email to