not sure if this got sent, so at the risk of a resend:
What version of zvm are you running? I do not see the network mask output on 
these commands on my vswitches on zvm520 or zvm530.
Maybe IBM got rid of these messages, come to think of it this may have been 
discussed a while back on this list.
David


-----Original Message-----
From: The IBM z/VM Operating System on behalf of Shimon Lebowitz
Sent: Mon 7/2/2007 6:54 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] vswitch problem
 
I just noticed something about the data I 
posted last week.

In the Q NIC output, I have this:

  CONNECTION NAME: z/VM0000  STATE: Session Established
      DEVICE: 0F00  UNIT: 000   ROLE: CTL-READ
      DEVICE: 0F01  UNIT: 001   ROLE: CTL-WRITE
      DEVICE: 0F02  UNIT: 002   ROLE: DATA
        UNICAST IP ADDRESSES:
          10.0.0.7         Mask: 255.0.0.0
          10.1.15.2        Mask: 255.0.0.0
          10.1.20.100      Mask: 255.0.0.0
          10.1.50.12       Mask: 255.0.0.0
          10.1.51.22       Mask: 255.0.0.0
          10.1.88.7        Mask: 255.0.0.0
          10.1.90.2        Mask: 255.0.0.0

And again in the Q VSWITCH this:

    ADAPTER OWNER: TCPIP    NIC: 0F00  NAME: VSWNIC1
      DEVICE: 0F02  UNIT: 002   ROLE: DATA
        UNICAST IP ADDRESSES:
          10.0.0.7         Mask: 255.0.0.0
          10.1.15.2        Mask: 255.0.0.0
          10.1.20.100      Mask: 255.0.0.0
          10.1.50.12       Mask: 255.0.0.0
          10.1.51.22       Mask: 255.0.0.0
          10.1.88.7        Mask: 255.0.0.0
          10.1.90.2        Mask: 255.0.0.0


All of which implies to me that TCPIP is trying to use
a class "A" mask of 255.0.0.0 . Why should that be,
when the profile definitions for the link are class "B"?

; LINK THROUGH QDIO NIC F00 TO VSWITCH1 - TO MAIN 10.0.0.0/16 LAN
DEVICE NIC-F00  OSD        F00     PORTNAME VSWNIC1 ; F00-F02
LINK LAN10    QDIOETHERNET  NIC-F00

GATEWAY
  10            =            LAN10     1500         0.255.0.0   0
  DEFAULTNET   10.0.0.6       LAN10     1500         0

Is this what is preventing my vswitch from working correctly?
And if so, what must I do to fix it?

Shimon

-- 
**********************************************************************
**
Shimon Lebowitz                mailto:[EMAIL PROTECTED]
VM System Programmer           .
Israel Police National HQ.     
Jerusalem, Israel              phone: +972 2 542-9877  fax: 542-9308
**********************************************************************
**


Reply via email to