Folks,
Back in Oct or so we installed new z9's with added storage and
IFL's. BUT, since we were under the gun we chose to just get us up as
were and add storage and or IFL later. So our VM system had 4g of
central and 1.5 of expanded. Well, a couple of months later I went to
the HMC and added 4g more to central and another 1.5 to expanded for
a total of 8g central and 3g expanded. Bounced the VM lpar and it did
indeed show via q stor a value of 8g and q xstore 3072m. We've had
cause to bounce ALL our lpars several times since, even adding stor
to z/OS. We've always say 4-5 hours after a boot of VM consumed 99%
of our xstore and I could see paging to dasd as well. This was before
and after the added storage. This morning we needed to IML the frame
and since that was done we've NOT moved at all from central to
expanded. My question is one of - was I really not getting the added
storage to VM until and IML was done? IF so, then where does the info
come from for the "q store and q xstore" commands?
Brian W. France
Systems Administrator (Mainframe)
Pennsylvania State University
Administrative Information Services - Infrastructure/SYSARC
Rm 25 Shields Bldg., University Park, Pa. 16802
814-863-4739
[EMAIL PROTECTED]
"To make an apple pie from scratch, you must first invent the universe."
Carl Sagan