Here is Mine: CONFIG00 DATADVH A1 V 80 Trunc=80 Size=10 Line=0 Col=1 Alt=0 ====> |...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....> 00000 * * * Top of File * * * 00001 DATAMOVE_MACHINE= DATAMOVE * * 00002 ONLINE= IMMED 00003 PW_INTERVAL_FOR_GEN= 83 90 00004 PW_INTERVAL_FOR_SET= 1 00005 PW_LOCK_MODE= AUTOMATIC 00006 PW_MIN_LENGTH= 6 00007 PW_WARN_MODE= AUTOMATIC 00008 RUNMODE= OPERATIONAL 00009 SORT_BY_DEVICE_ADDRESS= YES 00010 SORT_DIRECTORY= YES 00011 * * * End of File * * *
Thank you, Scott R Wandschneider Senior Systems Programmer Infocrossing, a WIPRO Company 11707 Miracle Hills Dr. Omaha, NE 68154 Office 402.963.8905 ________________________________________ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Howard Rifkind Sent: Thursday, June 19, 2008 3:55 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Dirmaint Start Up Problem. Thanks Mike. We were able to get Dirmaint at least to start working by reworking the config datadvh file. Would anyone on the list have an sample over ride file I can use as an example which I could use to make changes to the real config dvhdata file. I never created any such over ride file before. If you could give me a sample over ride file, would you be good enough to email it to me off list. Thanks. >>> Mike Walter <[EMAIL PROTECTED]> 6/18/2008 5:20 PM >>> Howard, I little more on your 2nd level DIRMAINT test... I found the uncompiled rexx source for the DVFPROF EXEC in the 5VMDIR30 disk 02B1. At line 626, it contains comments, followed by code to do it: /*!--------------------------------------------------------------------* /*! Release and detach non-required disks. * /*! (A disk is not required if it is linked R/O * /*! and has not been accessed yet.) * /*!--------------------------------------------------------------------* It appears that something is preventing DIRMAINT from getting its R/W link to the 192 and 21F disks, and then DVHPROF detaches them. That's an area of interests, but does not explain why DIRMAINT does not find the DVHUPDIR MODULE on its 191 disk. Answering that should get you closer. Are you sure that the source system from which you are DDRing these disks had a successful PUT2PROD DIRM? Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail. _____________ LEGAL NOTICE Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this E-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents of this E-mail or any action taken (or not taken) in reliance on it is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately, then delete this message and empty from your trash.