Wait state 1010 means CP didn't find a console. The default console addresses are defined in the SYSTEM CONFIG file on MAINT CF1. During installation one is instructed to enter the address of a 3270 console in the SAPL override panel: CONS=xxxx The xxxx is either the address of a real 3270 (or something behind for example a OSA ICC) or SYSG if you are at the HMC and want to use the "integrated 3270 console"
In generals: when a z/VM sets itself in disapbeld wait, only the last 4 digits of the PSW are important, and you can find the explanation by looking for message HCPnnnnW (if you have a VM running: HELP HCPnnnnW; else the CP msgs manual). 2009/8/5 Billy R. Bingham <billy.bingham...@suddenlink.net> > Hello, > > Trying to install z/VM 5.4 from a DVD and get the following right after I > select 540VM.ins: > > Partition LPARMS1 and central processor (CP) 00 are in a > disabled wait state. The disabled wait program status word > (PSW) is 00020000000000000000000000001010. Central > storage bytes 0-7 are: 7FFFF10F7FFFF10F7FFFF10F7FFFF10F > > > Any ideas? > > > Thanks, > > Billy > -- Kris Buelens, IBM Belgium, VM customer support