On Tuesday, 09/15/2009 at 09:44 EDT, "Frank M. Ramaekers" <framaek...@ailife.com> wrote:
> After 2nd level is brought up: > > From 1st level: > > q 5336-5338 > PRT 5336 ATTACHED TO VM2ND 5336 > PRT 5337 ATTACHED TO VM2ND 5337 > PRT 5338 ATTACHED TO VM2ND 5338 > > From 2nd level: > > q 5336-5338 > DEV 5336 OFFLINE , DEV 5337 OFFLINE , DEV 5338 OFFLINE > Ready; T=0.01/0.01 08:42:24 > vary on 5336-5338 > HCPCPN6895I Device 5336 cannot be varied online because the device > HCPCPN6895I identification data is inconclusive. > HCPCPN6785E Unable to identify device 5336 dynamically. > HCPCPN6895I Device 5337 cannot be varied online because the device > HCPCPN6895I identification data is inconclusive. > HCPCPN6785E Unable to identify device 5337 dynamically. > HCPCPN6895I Device 5338 cannot be varied online because the device > HCPCPN6895I identification data is inconclusive. > HCPCPN6785E Unable to identify device 5338 dynamically. > 3 device(s) specified; 0 device(s) successfully varied online > Ready(06785); T=0.01/0.01 08:42:46 > > I don't see why I can't bring these devices online 2nd level. I suspect that your 1st level SYSTEM CONFIG has RDEVICE entries that define these devices as printers. Copy those same entries to your 2nd level SYSTEM CONFIG. Alan Altmark z/VM Development IBM Endicott