Scott,
Here the information from my z/Linux ADMIN. Note that the IP's are
masked as we cannot send or publicize them Security reasons. Let me
know what you think.
[r...@e49l054p ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# IBM QETH
DEVICE=eth0
ARP=no
BOOTPROTO=static
IPADDR=10.15.333.444
MACADDR=
MTU=1500
NETMASK=255.255.0.0
NETTYPE=qeth
ONBOOT=yes
PORTNAME=
SUBCHANNELS=0.0.7203,0.0.7204,0.0.7205
TYPE=Ethernet
[r...@e49l054p ~]#
[r...@e49l054p ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
# IBM QETH
DEVICE=eth1
ARP=no
BOOTPROTO=static
IPADDR=10.16.333.444
MTU=1500
NETMASK=255.255.0.0
NETTYPE=qeth
ONBOOT=yes
PORTNAME=
SUBCHANNELS=0.0.7403,0.0.7404,0.0.7405
TYPE=Ethernet
[r...@e49l054p ~]#
I think this may be part of it;
[r...@e49l054p ~]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=e49l054p
GATEWAY=10.15.333.444
Thank You,
Terry Martin
Lockheed Martin - Citic
z/OS and z/VM Performance Tuning and Operating Systems Support
Office - 443 348-2102
Cell - 443 632-4191
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Scott Rohling
Sent: Tuesday, March 16, 2010 4:54 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: OSA VSWITCH QUESTION
Terry - we need to see the ifcfg-eth1 file - and maybe ifcfg-eth0 too to
help... I think you'll find them under /etc/sysconfig/network-scripts/
(?) You're showing us the config for what works - but not the config
for what doesn't...
Scott
On Tue, Mar 16, 2010 at 1:29 PM, Martin, Terry R. (CMS/CTR) (CTR)
<terry.mar...@cms.hhs.gov> wrote:
Error! Filename not specified.
Hi
I have a dilemma that I hope you can help with:
I have cloned a z/VM LPAR and a z/Linux guest from my Production system.
I have a VSWITCH set up and a matching NIC def in the Directory for the
z/Linux guest.
I can display the OSA and see that it is attached to the VSWITCH and I
can see that the NIC was configured correctly when the z/Linux guest is
logged on.
The z/Linux guest is RHEL 5.2. The problem is when the guest initializes
we see this message:
Bringing up interface eth1: qeth device eth1 does not seem to be
present, delaying initialization.
When I display the VSWITCH Q VSWITCH DET I expected to see the IP
address associated with the network interface show up in the VSWITCH
which tells me the we can get to the z/Linux guest but I don't see the
IP.
Now if we bring the z/Linux guest up in RESCUE mode where it is reading
the CONF file where I specifically enter the IP address I can display
the VSWITCH and see the IP address associated with the VSWITCH as I
expected and we can PING the z/Linux guest and login to it.
So what am I doing wrong here? Why on a normal boot can't I see the IP
in the VSWITCH and hence login into the z/Linux guest or PING it but
when I load it using the CONF file in RESCUE mode I can login to the
guest and PING it what am I missing?:
CONF FILE:
/* configuration information for RESCUE MODE */
HOSTNAME="E49L054P.CMS.HHS.GOV"
DASD="700,800-831"
NETTYPE="qeth"
SUBCHANNELS="0.0.7403,0.0.7404,0.0.7405"
PORTNAME=" "
IPADDR="10.16.49.13"
NETWORK="10.16.0.0"
NETMASK="255.255.0.0"
BROADCAST="10.16.255.255"
GATEWAY="10.16.0.254"
SEARCHDNS="cms.hhs.gov"
LAYER2=0
DNS="10.15.0.117"
MTU="1500"
VSWITCH WHEN GUEST is BROUGHT UP NORMALLY(No 10.16.49.13 IP):
q vswitch vse4ps11 det
VSWITCH SYSTEM VSE4PS11 Type: VSWITCH Connected: 1 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-00-00-00-03
State: Ready
IPTimeout: 5 QueueStorage: 8
RDEV: 8903 VDEV: 8903 Controller: DTCVSW2
VSWITCH Connection:
MAC address: 00-14-5E-B7-D4-94
RX Packets: 380 Discarded: 110318 Errors: 0
TX Packets: 357 Discarded: 0 Errors: 0
RX Bytes: 31684 TX Bytes: 99369
Device: 8903 Unit: 000 Role: DATA Port: 0001 Index: 0001
Adapter Connections:
Adapter Owner: E49L054P NIC: 7403 Name: UNASSIGNED
RX Packets: 986 Discarded: 0 Errors: 0
TX Packets: 0 Discarded: 0 Errors: 0
RX Bytes: 89162 TX Bytes: 0
Device: 7405 Unit: 002 Role: DATA Port: 0073 Index: 0010
Options: Broadcast Multicast IPv6 IPv4 VLAN
VSWITCH DISPLAY AFTER GUEST UP IN RESCUE MODE :
q vswitch vse4ps11 det
VSWITCH SYSTEM VSE4PS11 Type: VSWITCH Connected: 1 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-00-00-00-03
State: Ready
IPTimeout: 5 QueueStorage: 8
RDEV: 8903 VDEV: 8903 Controller: DTCVSW2
VSWITCH Connection:
MAC address: 00-14-5E-B7-D4-94
RX Packets: 380 Discarded: 110392 Errors: 0
TX Packets: 364 Discarded: 0 Errors: 0
RX Bytes: 31684 TX Bytes: 99921
Device: 8903 Unit: 000 Role: DATA Port: 0001 Index: 0001
Adapter Connections:
Adapter Owner: E49L054P NIC: 7403 Name: UNASSIGNED
RX Packets: 491 Discarded: 0 Errors: 0
TX Packets: 7 Discarded: 0 Errors: 0
RX Bytes: 43429 TX Bytes: 552
Device: 7405 Unit: 002 Role: DATA Port: 0074 Index: 0011
Options: Broadcast Multicast IPv6 IPv4 VLAN
Unicast IP Addresses:
10.16.49.13 MAC: 02-00-00-00-00-04
FE80::200:0:100:4 MAC: 02-00-00-00-00-04 Local
Multicast IP Addresses:
224.0.0.1 MAC: 01-00-5E-00-00-01
FF02::1 MAC: 33-33-00-00-00-01 Local
FF02::1:FF00:4 MAC: 33-33-FF-00-00-04 Local
q vswitch vse4ps11 det
VSWI
TCH SYSTEM VSE4PS11 Type: VSWITCH Connected: 1 Maxco
Thank You,
Terry Martin
Lockheed Martin - Citic
z/OS and z/VM Performance Tuning and Operating Systems Support
Office - 443 348-2102
Cell - 443 632-4191
