Try
SET VSWITCH VSWITCH1 CONNECT

On Fri, Jul 2, 2010 at 4:22 PM, McBride, Catherine <cmcbr...@kable.com>wrote:

>  Somebody rebooted the switch that our OSA cards are plugged into.  Our
> VSWITCH tried to recover by failing over from VSWITCH1 to VSWITCH2.
> Unfortunately, both of them terminate at the same physical switch and now we
> can't get either one to activate.  Output of Q VSWITCH looks like this:
>
> q vswitch
> VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12   Maxconn: INFINITE
>   PERSISTENT  RESTRICTED    NONROUTER                 Accounting: OFF
>   VLAN Unaware
>   MAC address: 02-00-00-00-00-01
>   State: Initialization in progress
>   IPTimeout: 5         QueueStorage: 8
>   Isolation Status: OFF
>   RDEV: 0800.P00            Controller: NONE     Error:  Detached
>   RDEV: 0810.P00            Controller: NONE     Error:  Path severed
>   RDEV: 0860.P00            Controller: NONE     Error:  Path severed
> VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0    Maxconn: INFINITE
>   PERSISTENT  RESTRICTED    NONROUTER                 Accounting: OFF
>   VLAN Unaware
>   MAC address: 02-00-00-00-00-02
>   State: Initialization in progress
>   IPTimeout: 5         QueueStorage: 8
>   Isolation Status: OFF
>   RDEV: 0803.P00            Controller: NONE     Error:  Detached
>   RDEV: 0813.P00            Controller: NONE     Error:  Path severed
>   RDEV: 0863.P00            Controller: NONE     Error:  Path severed
> I've tried attaching the RDEV's to DTCSW1 and DTCSW2, and autologged both
> of these as well.
> Queries of the RDEVS show the following:
>
> OSA  0800 ATTACHED TO DTCVSW1  0800 DEVTYPE OSA         CHPID F0 OSD
> Ready; T=0.01/0.01 15:13:52
> q 810
> OSA  0810 ATTACHED TO DTCVSW1  0810 DEVTYPE OSA         CHPID F1 OSD
> Ready; T=0.01/0.01 15:13:55
> q 860
> OSA  0860 ATTACHED TO DTCVSW1  0860 DEVTYPE OSA         CHPID F2 OSD
> Ready; T=0.01/0.01 15:14:01
> The CHPIDS are online.  We even popped the cover and looked at the blinking
> lights on the cards.
> DTCVSW1, DTCVSW2, and TCPIP are all logged on and active.
> I've tried varying off and varying on the devices, RESET, READY, etc.
> Any suggestions late on a Friday afternoon?
>
>
>
>



-- 
Mark Pace
Mainline Information Systems
1700 Summit Lake Drive
Tallahassee, FL. 32317

Reply via email to