Hi Alexander, I noticed that as well. I found out that the NETSTAT HOME will only display the switch name if it has coded on the relevant HOME statement in your TCPIP profile.
Regards, Paul Garment _____ From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Riedel, Alexander Sent: 11 August 2010 09:55 To: IBMVM@LISTSERV.UARK.EDU Subject: z/VM TCPIP over VSWITCH Hi, I have defined my TCPIP over an Layer2 VSWITCH and it is working, but the netstat home command doesnt show the connected VSWITCH. netstat home VM TCP/IP Netstat Level 610 TCP/IP Server Name: TCPIP IPv4 Home address entries: Address Subnet Mask Link VSWITCH ------- ----------- ------ ------- 172.16.145.68 <none> LVIPA68 <none> 10.1.97.196 <none> L09COW81 <none> Why is this not displayed correctly ? The display of my vswitch q vswitch vsw0 det VSWITCH SYSTEM VSW0 Type: VSWITCH Connected: 1 Maxconn: INFINITE PERSISTENT RESTRICTED ETHERNET Accounting: OFF VLAN Unaware MAC address: 02-00-04-00-00-01 State: Ready IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0100.P00 VDEV: 0100 Controller: DTCVSW2 VSWITCH Connection: RX Packets: 4172 Discarded: 0 Errors: 0 TX Packets: 5158 Discarded: 0 Errors: 0 RX Bytes: 294432 TX Bytes: 2289862 Device: 0100 Unit: 000 Role: DATA vPort: 0001 Index: 0001 Unicast IP Addresses: 10.1.97.193 MAC: 00-07-EC-76-A4-00 Remote Adapter Connections: Adapter Owner: TCPIP NIC: 0220.P00 Name: UNASSIGNED RX Packets: 44748 Discarded: 0 Errors: 0 TX Packets: 17544 Discarded: 5 Errors: 0 RX Bytes: 16525439 TX Bytes: 7150427 Device: 0220 Unit: 000 Role: DATA vPort: 0065 Index: 0065 Options: Ethernet Broadcast Unicast MAC Addresses: 02-00-04-00-00-05 Multicast MAC Addresses: 01-00-5E-00-00-01 33-33-00-00-00-01 33-33-FF-00-00-05 But the ifconfig - command shows the correct output ifconfig L09COW81 inet addr: 10.1.97.196 mask: 255.255.255.240 UP MTU: 8992 vdev: 0220 type: QDIO ETHERNET portname: UNASSIGNED transport type: ETHERNET MAC address: 02-00-04-00-00-05 ipv6: ENABLED VSWITCH name: VSW0 cpu: 0 forwarding: ENABLED ipv4 path MTU discovery: DISABLED RX bytes: 17959521 TX bytes: 7719150 IPv6 Addresses: FE80:0:0:0:0:4FF:FE00:5 Mit freundlichen Grüßen/ Kind regards, Alexander Riedel Systeme Mainframe Finanz Informatik Technologie Service Witschelstraße 81 90431 Nürnberg Tel: +49 89 94511-9244 <http://www.f-i-ts.de> www.f-i-ts.de This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments. Internet communications are not guaranteed to be secure or virus-free. The Barclays Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Replies to this e-mail may be monitored by the Barclays Group for operational or business reasons. Any opinion or other information in this e-mail or its attachments that does not relate to the business of the Barclays Group is personal to the sender and is not given or endorsed by the Barclays Group. Barclays Bank PLC.Registered in England and Wales (registered no. 1026167). Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom. Barclays Bank PLC is authorised and regulated by the Financial Services Authority.
