7zip and/or winrar should have no problems with it. On Wed, Nov 3, 2010 at 2:08 PM, George Henke/NYLIC < george_he...@newyorklife.com> wrote:
> > Here is what I get when I try to download. > > Sorry for the screen shot, but it was the only way I could capture the > data. > > > > I don't see an option for binary. > > If I click on open nothing happens. > > If I cleck on download it gives me a file I cannot unzip. > > > > > Peazip, however, was able to unzip it. > > > > > *"Frank M. Ramaekers" <framaek...@ailife.com>* > Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> > > 11/03/2010 01:54 PM > Please respond to > The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> > > To > IBMVM@LISTSERV.UARK.EDU > cc > Subject > Re: No IPL VSWITCH Connectivity > > > > > I just did (on a Linux server though) and had no problems. Are you sure > you issued a BINARY before the download? > > > > Frank M. Ramaekers Jr. > > > ------------------------------ > > *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On > Behalf Of *George Henke/NYLIC* > Sent:* Wednesday, November 03, 2010 10:29 AM* > To:* ib...@listserv.uark.edu* > Subject:* Re: No IPL VSWITCH Connectivity > > > I am trouble downloading and unziping the course. Something about invalid > archive library for Winzip. > > > *Tom Huegel <tehue...@gmail.com>* > Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> > > 11/03/2010 11:25 AM > > > Please respond to > The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> > > > To > IBMVM@LISTSERV.UARK.EDU > cc > > Subject > Re: No IPL VSWITCH Connectivity > > > > > > > > > > BTW Kris's selfstudy courses on the download page are EXCELLENT. > > On Wed, Nov 3, 2010 at 6:06 AM, Kris Buelens > <*kris.buel...@gmail.com*<kris.buel...@gmail.com>> > wrote: > If using ADDRESS COMMAND makes a difference, the most common cause is that > you've got a CP EXEC somewhere on a minidisk accessed by AUTOLOG1. > SYNONYMs and SET IMPCP can influence command execution too with ADDRESS CMS > (or PIPE CMS), but occur less often. > > You could read lesson 3 in our Telecourse (free, selfstudy): > > *http://www.vm.ibm.com/download/packages/descript.cgi?TCVM1*<http://www.vm.ibm.com/download/packages/descript.cgi?TCVM1> > > > 2010/11/2 George Henke/NYLIC > <*george_he...@newyorklife.com*<george_he...@newyorklife.com>> > > > > Tom: * > > I think you may have found the problem.* * > > You use ADDRESS COMMAND CP SET VSWITCH.* * > > I do not reset the REXX CMS ENVIRONMENT to the COMMAND ENVIRONMENT with > ADDRESS COMMAND.* > > Normally that is not a problem for CP commands, but in this case SET is > also a CMS command and without the ADDRESS COMMAND prefix it may be getting > processed as a CMS SET command, instead of a CP SET VSWITCH command and so > the GRANTS may never really be getting issued even though they appear to be, > they get Command Completed. > > From AUTOLOG1 Console, last IPL: * > > 68 *-* 'CP SET VSWITCH LNXVSW1 GRANT VLINUX1'* > >>> "CP SET VSWITCH LNXVSW1 GRANT VLINUX1" * > Command complete* > 69 *-* 'CP SET VSWITCH LNXVSW1 GRANT VLINUX2' > >>> "CP SET VSWITCH LNXVSW1 GRANT VLINUX2" > Command complete > 70 *-* 'CP SET VSWITCH LNXVSW1 GRANT VLINUX3' > >>> "CP SET VSWITCH LNXVSW1 GRANT VLINUX3" > Command complete > 71 *-* 'CP SET VSWITCH LNXVSW1 GRANT VLINUX4' > >>> "CP SET VSWITCH LNXVSW1 GRANT VLINUX4" > Command complete > 72 *-* 'CP SET VSWITCH LNXVSW1 GRANT VLINUX5' > >>> "CP SET VSWITCH LNXVSW1 GRANT VLINUX5" > Command complete > * > Without the ADDRESS COMMAND prefix could it be that the GRANTS are being > ignored even though they have the CP prefix.* * > > What do you think?* > > *Tom Huegel <**tehue...@gmail.com* <tehue...@gmail.com>*>* > Sent by: The IBM z/VM Operating System > <*ib...@listserv.uark.edu*<IBMVM@LISTSERV.UARK.EDU> > > > > 11/02/2010 03:52 PM > > > > > Please respond to > The IBM z/VM Operating System > <*ib...@listserv.uark.edu*<IBMVM@LISTSERV.UARK.EDU> > > > > > To > *ib...@listserv.uark.edu* <IBMVM@LISTSERV.UARK.EDU> > cc > > Subject > Re: No IPL VSWITCH Connectivity > > > > > > > > > > > I have my VSWITCHES defined in the SYSTEM CONFIG file and all of the > ADDRESS COMMAND CP SET VSWITCH VSWITCH1 GRANT vmuserid's in AUTOLOG1, > followed immediatly by XAUTOLOG LINUX1... LINUX2 ... LINUX etc. > SUSE 10 SP2 .. > I have no CP SLEEP commands and never had a problem. > For what it's worth I do not connect my TCPIP to a VSWITCH. > > > On Tue, Nov 2, 2010 at 11:02 AM, Martin, Terry R. (CMS/CTR) (CTR) <* > terry.mar...@cms.hhs.gov* <terry.mar...@cms.hhs.gov>> wrote: > Ok, my point was that you would not be able to connect the network and if > you can’t connect to the network having the VSWICTH defined does not mean > much at least not for me. > > > > *Thank You,* > > * * > > *Terry Martin* > > *Lockheed Martin - Citic* > > *z/OS and z/VM Performance Tuning and Operating Systems Support* > > *Office - 443 348-2102* > > *Cell - 443 632-4191* > > > > *From:* The IBM z/VM Operating System > [mailto:*ib...@listserv.uark.edu*<IBMVM@LISTSERV.UARK.EDU>] > *On Behalf Of *Miguel Delapaz* > Sent:* Tuesday, November 02, 2010 1:51 PM * > > To:* *ib...@listserv.uark.edu* <IBMVM@LISTSERV.UARK.EDU> > > *Subject:* Re: No IPL VSWITCH Connectivity > > > > In that case, the guest should still be able to connect to the VSWITCH > without an issue. It just won't have access to the physical network. The > controller virtual machines have nothing to do with general VSWITCH > operation...they are simply there to manage the OSAs that may be attached to > the VSWITCH. > > Regards, > Miguel Delapaz > z/VM Development > > > The IBM z/VM Operating System > <*ib...@listserv.uark.edu*<IBMVM@LISTSERV.UARK.EDU>> > wrote on 11/02/2010 10:45:33 AM: > > > > > Ok, they may be defined but try having a z/Linux guest connect to > > them before DTCVSW* is up! > > > > Thank You, > > > > Terry Martin > > Lockheed Martin - Citic > > z/OS and z/VM Performance Tuning and Operating Systems Support > > Office - 443 348-2102 > > Cell - 443 632-4191 > > > > From: The IBM z/VM Operating System > > [*mailto:ib...@listserv.uark.edu*<IBMVM@LISTSERV.UARK.EDU>] > > > On Behalf Of Riedel, Alexander > > Sent: Tuesday, November 02, 2010 1:33 PM > > To: *ib...@listserv.uark.edu* <IBMVM@LISTSERV.UARK.EDU> > > Subject: AW: No IPL VSWITCH Connectivity > > > > Sorry Terry, but i think you are wrong. I define my 4 VSWITCHES all > > in the SYSTEM CONFIG and it works. At this time the TCPIP or DTCVSW* > > are definitely not started. > > > > Kind regards, > > > > Alexander Riedel > > > > > -- > Kris Buelens, > IBM Belgium, VM customer support > > _____________________________________________________ This message contains > information which is privileged and confidential and is solely for the use > of the intended recipient. If you are not the intended recipient, be aware > that any review, disclosure, copying, distribution, or use of the contents > of this message is strictly prohibited. If you have received this in error, > please destroy it immediately and notify us at privacy...@ailife.com. > > -- Mark D Pace Senior Systems Engineer Mainline Information Systems
