Dear friends,
i have a new problem today..
For the first time i tryed set a vswitch using port group definitions
using:
set port group grpsrv01 join 1D00.P0 1E00.P0
Port group GRPSRV01 is created
Ready; T=0.01/0.01 11:19:10
DEFINE VSWITCH VSWSVC01 ETHERNET RDEV 0800.P0 GROUP GRPSRV01
VSWITCH SYSTEM VSWSVC01 is created
SET VSWITCH VSWSVC01 GRANT THOR
q vswitch vswsvc01 acc
VSWITCH SYSTEM VSWSVC01 Type: QDIO Connected: 1 Maxconn: INFINITE
PERSISTENT RESTRICTED ETHERNET Accounting: OFF
VLAN Unaware
MAC address: 02-61-01-00-00-01 MAC Protection: Unspecified
State: Ready
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
Authorized userids:
SYSTEM THOR
Uplink Port:
Group: GRPSRV01 Active LACP Mode: Active
RDEV: 1D00.P00 VDEV: 1D00 Controller: DTCVSW2
RDEV: 1E00.P00 VDEV: 1E00 Controller: DTCVSW1
Backup Devices:
RDEV: 0800.P00 VDEV: 0800 Controller: DTCVSW2 BACKUP
Ready; T=0.01/0.01 13:04:10
on USER DIRECT i set:
02125 USER THOR THOR 512M 512M G
02126 INCLUDE LINDFLT
02127 MACHINE ESA 2
02128 CPU 00
02129 NICDEF 0800 TYPE QDIO LAN SYSTEM VSWSVC01
02130 * DISCO S.O
02131 MDISK 100 3390 0001 10016 LX9B52 MW
but , when i tried make linux up, appears like there is no device 0800 ...
query #cp q nic direct on guest i have:
CP Q NIC
Default System MAC Protection: OFF
Network Device Allocation: Permitted
before using link aggregation, i guet a lot of information more like this:
00: CP Q NIC
00: Adapter 0800.P00 Type: QDIO Name: UNASSIGNED Devices: 3
00: MAC: 02-00-00-00-00-0F VSWITCH: SYSTEM VSWSVC01
There is a special definition on vswitch or user direct to make a guest
using link aggregation? I can't find any aditional information... thanks
again for any help.
