Where can I get a copy of GG22-9299. I have looked in IBM, but I can't seem to find it.
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of George Henke/NYLIC Sent: Thursday, March 03, 2011 10:43 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Capacity Monitoring question An operating system, be in z/VM or z/OS, will always try to drive the CPU 100%. This is goodness. So looking at max CPU will never tell you anything about CPU capacity, it is an almost meaningless metric which can be at best very deceptive, a common, innocent mistake and misconception. What is needed is the Saturation Data Point (SDP), which is calculated as the HIST average CPU peaks divided by the HISTaverage CPU average. The operative word here is HISTORICAL, 6 months at least. This will give you the peak-to- average ratio: 2:1, 3:2, or whatever. It depends on the nature of the workloads, their variability. It differs for every shop. Once you know the peak-to-average ratio all we need do at any given point in time is look at the average instead of the peak and that will tell us if we have reached the SDP and need more CPU. To illustrate: Let's say the CPU is pegged at 100% and averages 60%, though you ignore the average as unimportant. thinking you're configuring for the peak, not the average. Let's also say that your historical peak to average ratio is 2:1, though you do not know that or consider it important at the time. So the CIO orders a CPU upgrade, paying millions in TPV software charges for the upgrade. After the upgrade, the CIO looks at the CPU and sees it is maxing now at 60% and he is ecstatic because he thinks he has 40% CPU headroom and with about 5-10% annual CPU growth he has at least a 3 - 5 year life in the configuration. 6 months later, the batch window is expanding, batch is backing up, response time is degrading, CPU is maxing at 100% and the CIO wants to know what happened. With a 2:1 peak to average ratio, when the CPU maxes at: * 60%, it averages 30%. * 100% it averages 50%. * 120% it averages 60% So the headroom, initially, was not 40% (100%-60%) as the CIO thought, but only 20% (50%-30%) which got absorbed in 6 months But why so quickly? Why 20% in only 6 months? Remember before the upgrade the average CPU was 60%. That means the maximum CPU was really 120% not 100% and there was 20% latent demand. Machines do not report much more than 100% CPU. Another reason not to be mislead by max CPU. So between the 5 - 10 % normal CPU growth and the impact of the 20% latent demand, the config really had a life of only 6 months. True we should always configure for the peaks, not averages, but it is only the average that will ever tell us when we are out of CPU once we know the historical peak-to-average ratio. R.J. Wicks, IBM, has written a classic manual on this: Balanced Systems and Capacity Planning, GG22-9299 (119 pages) Berry van Sleeuwen <berry.vansleeu...@xs4all.nl> Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 03/02/2011 07:05 PM Please respond to IBMVM <IBMVM@LISTSERV.UARK.EDU> To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Capacity Monitoring question Hi Nick, We monitor VM on page usage and page IO, our guest on VM for Queue and storage usage (main, xstor and swap). Also we monitor guest CPU usage and metrics like the limit list. Linux memory is always at 100% so no sense in monitoring over there but we do monitor swap usage. Linux CPU gives bad numbers to start with (yes even on current kernel levels they are still wrong) so don't monitor CPU on the guests. Actually, 100% CPU is not a bad thing at all. Where most OS-ses become less responsive above 90% z/VM will still give you good response even at high numbers. We like to have it above 90%. Obviously you would need some capacity for new guests. So when you are running 100% CPU all the time there can be a case for an additional IFL. But also look at the guests, determine if they are running processes you don't need or that hurt overal performance. Watch your linux guests on responsetimes and batch runtimes. Set a good relative share and if that doesn't help you could consider adding IFL's. Keep VM paging below 50%, add paging DASD when needed. We have a VM that is overcommitted to 9:1. Our production Linux VM is at 2:1 with room to spare. Expect even high page IO rates, 1000's IO/sec don't have to be bad. Keep an eye on guests that are competing for storage. Especially loading users and E-lists can point to a resource problem. Try to fix it on the guest first (eliminate processes, reduce memory sizes etc). Make sure the guests don't stay in Q3. It will hurt other servers. So eliminate unused processes, don't use pings or other keep alive tooling. Be aware that most regular linux tooling keeps the guest active. Obviously when you are running batch the guest will stay in Q3 but then it's in there for a reason. Some of these issues are also covered in the linux-390 list (http://www2.marist.edu/htbin/wlvindex?LINUX-390 <http://www2.marist.edu/htbin/wlvindex?LINUX-390> ). Take a look over there also. Regards, Berry. Op 02-03-11 23:28, Nick Warren schreef: > Hi Tony, Thanks for the response. > > I probably didn't ask the question(s) very well. I'm working with a customer that has no capacity plan regarding the use of z/VM as a linux host. We're seeing both CPU and Memory usage on the z/VM side increasing. Performance on the linux guests is acceptable at this time. > > Aside from waiting for the linux users to start complaining - what metrics and thresholds should I be tracking as early predictors of capacity problems? > > Obviously if CPU usage is constantly 100% that's probably not good. I'm currently watching CPU, IOWait and Stolen time but wonder if those are sufficient. Any suggestion as what a good maximum number is? > > Memory is a larger concern - In a previous life as a mvs sysprog I would watch paging/swapping and delay times among others. Are there any rules of thumb regarding paging or swapping in z/VM? Is there something better that paging/swapping for capacity prediction? > > Thanks again, > > Nick > > ---------------------------------------- > >> Date: Wed, 2 Mar 2011 13:47:42 -0800 >> From: generalemailli...@yahoo.com.au >> Subject: Re: Capacity Monitoring question >> To: IBMVM@LISTSERV.UARK.EDU >> >> We use Performance Toolkit with APPLDATA enabled, then from option 29 in Perf >> toolkit we get >> >> Linux screens selection >> S Display Description >> . LINUX RMF PM system selection menu >> . LXCPU Summary CPU activity display >> . LXMEM Summary memory util. & activity display >> . LXNETWRK Summary network activity display >> >> Interval 02:11:28-08:44:10, on 2011/03/03 (CURRENT interval, select interim or >> average data) >> ______ . . . . . . . . . . >> . . . . . . >> >> <------------------- Total CPU ---------------------------> >> <------------- Processes --------------> >> Linux Virt <---------------- Utilization (%) ------------------------> <---- >> Current -----> <-Average Running-> Nr of >> Userid CPUs TotCPU User Kernel Nice IRQ SoftIRQ IOWait Idle Stolen Runabl >> Waiting Total 1_Min 5_Min 15_Min Users >> >>> System< 2.0 4.4 2.3 1.9 .0 .0 .1 .9 193.2 1.6 >>> 2.0 .0 434.5 .08 .15 .12 4 >>> >> DLVOMG01 2 .4 .2 .2 .0 .0 .0 .2 198.8 .6 >> 2 0 215 .00 .00 .00 >> >> Interval 02:11:28-08:44:10, on 2011/03/03 (CURRENT interval, select interim or >> average data) >> ______ . . . . . . . . . >> . . . . . . . >> >> <------------ Memory Allocation (MB) -------------> <------- Swapping >> -------> <--- Pages/s ---> <-BlockIO-> >> Linux <--- Main ---> <--- High ---> Buffers Cache <-Space (MB)-> >> <-Pgs/sec-> Allo <-Faults--> <--kB/sec-> Nr of >> Userid M_Total %MUsed H_Total %HUsed Shared /CaFree Used S_Total %SUsed >> In Out cates Major Minor Read Write Users >> >>> System< 3516 98.2 .0 .0 .0 240.7 1855 1744 .1 >>> .000 .000 331.1 .000 916.1 43.57 37.53 4 >>> >> DLVOMG01 2007 98.1 .0 .0 .0 225.7 1495 256.0 .0 >> .000 .000 103.1 .000 229.5 55.16 18.51 >> >> Regards, >> Tony >> >> >> >> ----- Original Message ---- >> From: Nick Warren >> To: IBMVM@LISTSERV.UARK.EDU >> Sent: Thu, 3 March, 2011 7:24:09 AM >> Subject: Re: Capacity Monitoring question >> >> Sorry, Didn't know protocol. >> >> Nick Warren - freelance consultant. New to z/VM - experience with AIX, HPUX, >> MVS, Windows. >> ________________________________ >> >>> Date: Wed, 2 Mar 2011 20:43:35 +0000 >>> From: scott.rohl...@gmail.com >>> Subject: Re: Capacity Monitoring question >>> To: IBMVM@LISTSERV.UARK.EDU >>> >>> If you want help - you're gonna have to introduce yourself... >>> >>> Scott Rohling >>> >>> On Mar 2, 2011 12:22pm, new zvm wrote: >>> >>>> I'm relative new to z/VM. I have a couple of z/VM LPARs runing Linux >>>> >>> guests and have more coming. >>> >>>> >>>> >>>> What I'm wondering is this: >>>> >>>> >>>> >>>> What z/VM metrics are you monitoring and what thresholds do you use >>>> >>> as indicators that more capacity is needed - Specifically CPU and >>> Memory. >>> >>>> >>>> >>>> Thanks in advance >>>> >>>> >>>> >>>> New 2 zVM >>>> >>>> >>>> >>>> >>>> >>>> >>>> >> >> >> > > > ========================== This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
