If an aggregate has the following conditions:
- The SRIOV LAG DDP package has been enabled
- The bond is in 802.3ad LACP mode
- The bond is disqualified from supporting SRIOV VF LAG
- Both interfaces were added simultaneously to the bond (same command)
Then there is a chance that the two interfaces will be assigned different
LACP Aggregator ID's. This will cause a failure of the LACP control over
the bond.
To fix this, we can detect if the primary interface for the bond (as
defined by the driver) is not in switchdev mode, and exit the setup flow
if so.
Reproduction steps:
%> ip link add bond0 type bond mode 802.3ad miimon 100
%> ip link set bond0 up
%> ifenslave bond0 eth0 eth1
%> cat /proc/net/bonding/bond0 | grep Agg
Check for Aggregator IDs that differ.
Fixes: ec5a6c5f79ed ("ice: process events created by lag netdev event handler")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktio...@intel.com>
Signed-off-by: Dave Ertman <david.m.ert...@intel.com>
---
drivers/net/ethernet/intel/ice/ice_lag.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_lag.c
b/drivers/net/ethernet/intel/ice/ice_lag.c
index 22371011c249..2410aee59fb2 100644
--- a/drivers/net/ethernet/intel/ice/ice_lag.c
+++ b/drivers/net/ethernet/intel/ice/ice_lag.c
@@ -1321,12 +1321,18 @@ static void ice_lag_changeupper_event(struct ice_lag
*lag, void *ptr)
*/
if (!primary_lag) {
lag->primary = true;
+ if (!ice_is_switchdev_running(lag->pf))
+ return;
+
/* Configure primary's SWID to be shared */
ice_lag_primary_swid(lag, true);
primary_lag = lag;
} else {
u16 swid;
+ if (!ice_is_switchdev_running(primary_lag->pf))
+ return;
+
swid = primary_lag->pf->hw.port_info->sw_id;
ice_lag_set_swid(swid, lag, true);
ice_lag_add_prune_list(primary_lag, lag->pf);
--
2.49.0
