I too agree with Jim's view. Leaving mapped addresses as it is the best way to go about. changing APIs usage at this stage when they are already deployed is quite difficult.
----- Original Message ----- From: "Bound, Jim" <[EMAIL PROTECTED]> To: "Bob Hinden" <[EMAIL PROTECTED]>; "IPv6 WG" <ipv6@ietf.org> Sent: Tuesday, February 01, 2005 10:52 PM Subject: RE: IPv6 Address Architecture update question Folks, I strongly agree with Bob Hinden. We have been down this path before and discussion. IPv4-Mapped addresses are now used on every production implementation and in most IPv6 production IP dual stacks. They cannot be removed and the industry will not and does not support such a change. The APIs are in use now also by Application Providers porting to IPv6. There is absolutely no reason to deprecate Mapped-Addresses and such an idea is totally unacceptable for all the reasons below and also we should not alter our base specification. Regarding compatible addresses they are harmless but not being used by most implementations or deployments, 6to4 is used. But I see not point in deprecating that either. Regards, /jim > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Bob Hinden > Sent: Tuesday, February 01, 2005 7:27 AM > To: IPv6 WG > Subject: Re: IPv6 Address Architecture update question > > Hi, > > In response to my question about keeping the "IPv6 Addresses > with Embedded > IPv4 Addresses" (e.g., compatible and mapped) I heard the following: > > "I think that at least all the BSD's and most Linuxes are using this. > They allow binding on :: (IPv6 any) and also accept IPv4 > connections on the same socket, which are then represented in > netstat etc as ::ffff:1.2.3.4.", "IMO the section can be > removed and programmers need to be learned the correct thing > for which I always very inclined to point people to Eva's > excellent document at > http://gsyc.escet.urjc.es/~eva/IPv6-web/ipv6.html and/or > draft-ietf-v6ops-application-transition-02.txt" > > "They should not be removed. Implementations already support > it, removing would just create confusion. I don't see any > harm in keeping it in." > > "helps with porting applications" and "dropping this section > will create confusion and chaos for the already ported applications" > > "Among other things, this would break the just published full > Standard for URIs (RFC 3986).", "I suspect some people have used the > ::10.1.2.3 format to carry IPv4 addresses in an IPv6 > container, simply for convenience. I think this is very > convenient and should be available.", " otoh the > ::FFFF:10.1.2.3 format seems useless to me." > > "IPv4-mapped addresses facilitate an important > interoperability mechanism in the socket API (RFC 3493, > section 3.7).", "the API still needs a way to represent IPv4 > addresses in a way that preserves compatibility between IPv6 > and IPv4 hosts. Removal just makes transition all the more > time-consuming and difficult for software developers. > > "rather see clarification of the use of embedded addresses in > the document rather than complete removal. Ie. add a > statement to the effect of 'Embedded addresses are intended > for internal representation only'." > > "It is clear that the mapped addresses are widely used and > useful, and a lot of people have raised their concerns about > removing that.", "I suggest just simply removing compatibles." > > "Removal and formal deprecation would simplify life for > software developers.", "We might as well rid developers of > the burden of having to cope with mapped-address sockets as > well.", "Anyway, in summary, removal would in my opinion > actually make transition much easier for software developers, > not harder. Don't let the superficial ease of the > mapped-address API fool you :)" > > My take of this is that they should remain in the IPv6 > address architecture. There is current usage and removing > them would break other specifications. > > Thanks, > Bob > > > > > -------------------------------------------------------------------- > IETF IPv6 working group mailing list > ipv6@ietf.org > Administrative Requests: https://www1.ietf.org/mailman/listinfo/ipv6 > -------------------------------------------------------------------- > -------------------------------------------------------------------- IETF IPv6 working group mailing list ipv6@ietf.org Administrative Requests: https://www1.ietf.org/mailman/listinfo/ipv6 -------------------------------------------------------------------- -------------------------------------------------------------------- IETF IPv6 working group mailing list ipv6@ietf.org Administrative Requests: https://www1.ietf.org/mailman/listinfo/ipv6 --------------------------------------------------------------------