Hi,

I just noticed
http://www.nanog.org/mtg-0710/presentations/Dickson-lightning.pdf
and found some serious flaws and most likely misunderstandings in the
way that some things are presented in there. It was already publicly
presented at the NANOG meeting, so lets discuss ;)

<insert humble mode disclaimer etc />

=======
Slide 4: 2000::/3 are indeed only 125 bits, but this is done so that if
2000::/3 turns out to be a mistake that another of the 8 /3's can be
chosen to start again, and improve on it. As such, only using 2000::/3
at the moment is a great thing. Indeed this will most likely then create
a bit of a "Class A" situation, but most very likely it is going to be
just fun.

=======
Slide 9: Of course you can ignore it, just use DHCP. Only fe80::/10 is
fixed to use EUI-64 at the moment. Everything else, if you want can be
done with /126's if you really want. But that defies the whole idea of
stateless autoconfiguration. Nevertheless, if you really want, you can.

But why would you? As an ISP you go to your RIR and the RIR allocates
you a block of address space (generally a /32 or much larger) based on
how many customers you expect to have times /48 + some HD-based overhead.

As such, you as an ISP will get more than enough address space.

========
Slide 10/11: You don't reserve any bits for customers. They are already
getting a /48 which should be *way more than sufficient* for their
purposes. If they really will need more than 65536 /64 based networks
they will already have such a large network now, and thus can tell you
"hey we need a /47" or something, or they will at a certain point run
out and come back and you give them another /48, which does not really
have to be consecutive. Most of those very large networks though will
simply request PI space. As such they are not your worries.

If you are reserving space you clearly misunderstood the whole idea of
the /48's.

Also, there have been plans already (eg by Thomas Nartens) to make the
default assignment size /56 to end-users. Companies would still get
/48's though.


Why would this "squeeze the ISP?", you can get as much space from your
RIR as you require. Same as for IPv4. Justify and receive.

======
Slide 12: IMHO you indeed really don't get it ;)

Does it matter if you have /40's routed to your distinct PoPs, thus
geo-aggregated, and then route /48's from each PoP to the customer, or
make this a difference when you make that into /48's and /64's
respectively? The route count will remain the same.

Note also that there are still not 1000 IPv6 prefixes globally...

====

I won't even go in on the rest of the slides, as the above already make
all your assumptions for the rest broken...

Greets,
 Jeroen

Attachment: signature.asc
Description: OpenPGP digital signature

--------------------------------------------------------------------
IETF IPv6 working group mailing list
ipv6@ietf.org
Administrative Requests: https://www1.ietf.org/mailman/listinfo/ipv6
--------------------------------------------------------------------

Reply via email to