$ dmesg
[    0.000000] BIOS EBDA/lowmem at: 0009e800/0009e800
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-11-server (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 02:45:36 UTC 2009 (Ubuntu 2.6.28-11.42-server)
[    0.000000] Command line: root=UUID=9fd04f73-0f4e-4398-b649-b9959d53b541 ro quiet splash  crashkernel=384M-2G:64M@16M,2G-:128M@16M
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000100 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[    0.000000]  BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e8000000 - 00000000ec000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x220000 max_arch_pfn = 0x3ffffffff
[    0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x3ffffffff
[    0.000000] Scanning 2 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000100 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 0000000000008000 (usable)
[    0.000000]  modified: 0000000000008000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 0000000000091800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000dfee0000 (usable)
[    0.000000]  modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[    0.000000]  modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[    0.000000]  modified: 00000000dfef0000 - 00000000dff00000 (reserved)
[    0.000000]  modified: 00000000e8000000 - 00000000ec000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000220000000 (usable)
[    0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[    0.000000]  0000000000 - 00dfe00000 page 2M
[    0.000000]  00dfe00000 - 00dfee0000 page 4k
[    0.000000] kernel direct mapping tables up to dfee0000 @ 10000-16000
[    0.000000] last_map_addr: dfee0000 end: dfee0000
[    0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[    0.000000]  0100000000 - 0220000000 page 2M
[    0.000000] kernel direct mapping tables up to 220000000 @ 14000-1e000
[    0.000000] last_map_addr: 220000000 end: 220000000
[    0.000000] RAMDISK: 7fb91000 - 7fff3aeb
[    0.000000] ACPI: RSDP 000F6AF0, 0014 (r0 GBT   )
[    0.000000] ACPI: RSDT DFEE3040, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: FACP DFEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: DSDT DFEE3180, 4B2A (r1 GBT    GBTUACPI     1000 MSFT  100000C)
[    0.000000] ACPI: FACS DFEE0000, 0040
[    0.000000] ACPI: HPET DFEE7E00, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
[    0.000000] ACPI: MCFG DFEE7E80, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: APIC DFEE7D00, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: SSDT DFEE87E0, 03AB (r1  PmRef    CpuPm     3000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0220000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 0000b854b0]    TEXT DATA BSS ==> [0000200000 - 0000b854b0]
[    0.000000]   #3 [007fb91000 - 007fff3aeb]          RAMDISK ==> [007fb91000 - 007fff3aeb]
[    0.000000]   #4 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
[    0.000000]   #5 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
[    0.000000]   #6 [0000014000 - 0000019000]          PGTABLE ==> [0000014000 - 0000019000]
[    0.000000] found SMP MP-table at [ffff8800000f5100] 000f5100
[    0.000000]  [ffffe20000000000-ffffe200077fffff] PMD -> [ffff880028200000-ffff88002f9fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000006 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00220000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000006 -> 0x00000008
[    0.000000]     0: 0x00000010 -> 0x00000091
[    0.000000]     0: 0x00000100 -> 0x000dfee0
[    0.000000]     0: 0x00100000 -> 0x00220000
[    0.000000] On node 0 totalpages: 2096739
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 2548 pages reserved
[    0.000000]   DMA zone: 1367 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 898840 pages, LIFO batch:31
[    0.000000]   Normal zone: 16128 pages used for memmap
[    0.000000]   Normal zone: 1163520 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 0000000000091000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
[    0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[    0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[    0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000e8000000
[    0.000000] PM: Registered nosave memory: 00000000e8000000 - 00000000ec000000
[    0.000000] PM: Registered nosave memory: 00000000ec000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at ee000000 (gap: ec000000:12c00000)
[    0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2063727
[    0.000000] Kernel command line: root=UUID=9fd04f73-0f4e-4398-b649-b9959d53b541 ro quiet splash  crashkernel=384M-2G:64M@16M,2G-:128M@16M
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2399.838 MHz processor.
[    0.010000] Console: colour VGA+ 80x25
[    0.010000] console [tty0] enabled
[    0.010000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010000] allocated 89128960 bytes of page_cgroup
[    0.010000] please try cgroup_disable=memory option if you don't want
[    0.010000] Scanning for low memory corruption every 60 seconds
[    0.010000] Checking aperture...
[    0.010000] No AGP bridge found
[    0.010000] Calgary: detecting Calgary via BIOS EBDA area
[    0.010000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.010000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.010000] Placing software IO TLB between 0x20000000 - 0x24000000
[    0.010000] Memory: 8082996k/8912896k available (4758k kernel code, 525940k absent, 303004k reserved, 2542k data, 536k init)
[    0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.010000] hpet clockevent registered
[    0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.010009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.67 BogoMIPS (lpj=23998380)
[    0.010033] Security Framework initialized
[    0.010040] SELinux:  Disabled at boot.
[    0.010052] AppArmor: AppArmor initialized
[    0.010061] Mount-cache hash table entries: 256
[    0.010204] Initializing cgroup subsys ns
[    0.010208] Initializing cgroup subsys cpuacct
[    0.010211] Initializing cgroup subsys memory
[    0.010215] Initializing cgroup subsys freezer
[    0.010231] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010233] CPU: L2 cache: 4096K
[    0.010237] CPU: Physical Processor ID: 0
[    0.010239] CPU: Processor Core ID: 0
[    0.010242] using mwait in idle threads.
[    0.013115] ACPI: Core revision 20080926
[    0.014754] ACPI: Checking initramfs for custom DSDT
[    0.229036] Setting APIC routing to flat
[    0.229397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.329410] CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.330000] Booting processor 1 APIC 0x1 ip 0x6000
[    0.010000] Initializing CPU#1
[    0.010000] Calibrating delay using timer specific routine.. 4800.02 BogoMIPS (lpj=24000120)
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 4096K
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 1
[    0.480762] CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.480791] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.490121] Booting processor 2 APIC 0x3 ip 0x6000
[    0.010000] Initializing CPU#2
[    0.010000] Calibrating delay using timer specific routine.. 4800.06 BogoMIPS (lpj=24000321)
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 4096K
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 3
[    0.650695] CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.650723] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.660091] Booting processor 3 APIC 0x2 ip 0x6000
[    0.010000] Initializing CPU#3
[    0.010000] Calibrating delay using timer specific routine.. 4800.04 BogoMIPS (lpj=24000204)
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 4096K
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 2
[    0.820698] CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[    0.820725] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.830025] Brought up 4 CPUs
[    0.830029] Total of 4 processors activated (19199.80 BogoMIPS).
[    0.830077] CPU0 attaching sched-domain:
[    0.830079]  domain 0: span 0-1 level MC
[    0.830082]   groups: 0 1
[    0.830086]   domain 1: span 0-3 level CPU
[    0.830088]    groups: 0-1 2-3
[    0.830094] CPU1 attaching sched-domain:
[    0.830096]  domain 0: span 0-1 level MC
[    0.830098]   groups: 1 0
[    0.830101]   domain 1: span 0-3 level CPU
[    0.830104]    groups: 0-1 2-3
[    0.830108] CPU2 attaching sched-domain:
[    0.830110]  domain 0: span 2-3 level MC
[    0.830112]   groups: 2 3
[    0.830115]   domain 1: span 0-3 level CPU
[    0.830117]    groups: 2-3 0-1
[    0.830122] CPU3 attaching sched-domain:
[    0.830124]  domain 0: span 2-3 level MC
[    0.830126]   groups: 3 2
[    0.830129]   domain 1: span 0-3 level CPU
[    0.830131]    groups: 2-3 0-1
[    0.830260] net_namespace: 1400 bytes
[    0.830260] Booting paravirtualized kernel on bare hardware
[    0.830313] Time: 22:42:48  Date: 04/21/09
[    0.830313] regulator: core version 0.5
[    0.830313] NET: Registered protocol family 16
[    0.830313] ACPI: bus type pci registered
[    0.830313] PCI: MCFG configuration 0: base e8000000 segment 0 buses 0 - 63
[    0.830313] PCI: MCFG area at e8000000 reserved in E820
[    0.833407] PCI: Using MMCONFIG at e8000000 - ebffffff
[    0.833409] PCI: Using configuration type 1 for base access
[    0.834202] ACPI: EC: Look up EC in DSDT
[    0.843952] ACPI: Interpreter enabled
[    0.843957] ACPI: (supports S0 S3 S4 S5)
[    0.843981] ACPI: Using IOAPIC for interrupt routing
[    0.849539] ACPI: No dock devices found.
[    0.849552] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.849646] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.849650] pci 0000:00:01.0: PME# disabled
[    0.849721] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f]
[    0.849783] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f]
[    0.849845] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f]
[    0.849898] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc101000-0xfc1013ff]
[    0.849976] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.849980] pci 0000:00:1c.0: PME# disabled
[    0.850051] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.850055] pci 0000:00:1c.3: PME# disabled
[    0.850101] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.850105] pci 0000:00:1c.4: PME# disabled
[    0.850159] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f]
[    0.850220] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
[    0.850282] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f]
[    0.850333] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc100000-0xfc1003ff]
[    0.850477] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.850480] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.850532] pci 0000:00:1f.2: reg 10 io port: [0xe600-0xe607]
[    0.850538] pci 0000:00:1f.2: reg 14 io port: [0xe700-0xe703]
[    0.850544] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
[    0.850549] pci 0000:00:1f.2: reg 1c io port: [0xe900-0xe903]
[    0.850555] pci 0000:00:1f.2: reg 20 io port: [0xea00-0xea1f]
[    0.850561] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc102000-0xfc1027ff]
[    0.850575] pci 0000:00:1f.2: PME# supported from D3hot
[    0.850579] pci 0000:00:1f.2: PME# disabled
[    0.850607] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc103000-0xfc1030ff]
[    0.850621] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[    0.850662] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[    0.850668] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
[    0.850674] pci 0000:01:00.0: reg 18 32bit mmio: [0xfb000000-0xfb00ffff]
[    0.850690] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.850698] pci 0000:01:00.0: supports D1 D2
[    0.850726] pci 0000:01:00.1: reg 10 32bit mmio: [0xfb010000-0xfb01ffff]
[    0.850756] pci 0000:01:00.1: supports D1 D2
[    0.850799] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[    0.850802] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
[    0.850807] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xe7ffffff]
[    0.850847] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff]
[    0.850943] pci 0000:03:00.0: reg 24 32bit mmio: [0xfc000000-0xfc001fff]
[    0.850964] pci 0000:03:00.0: PME# supported from D3hot
[    0.850969] pci 0000:03:00.0: PME# disabled
[    0.851020] pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
[    0.851030] pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103]
[    0.851039] pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
[    0.851048] pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303]
[    0.851057] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
[    0.851135] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[    0.851139] pci 0000:00:1c.3: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
[    0.851294] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff]
[    0.851355] pci 0000:04:00.0: reg 18 64bit mmio: [0xf9000000-0xf9000fff]
[    0.851416] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.851448] pci 0000:04:00.0: supports D1 D2
[    0.851450] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.851461] pci 0000:04:00.0: PME# disabled
[    0.851541] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[    0.851545] pci 0000:00:1c.4: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
[    0.851551] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfc200000-0xfc2fffff]
[    0.851591] pci 0000:05:00.0: reg 10 32bit mmio: [0xec000000-0xefffffff]
[    0.851666] pci 0000:05:01.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff]
[    0.851741] pci 0000:05:02.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
[    0.851821] pci 0000:00:1e.0: transparent bridge
[    0.851827] pci 0000:00:1e.0: bridge 32bit mmio: [0xec000000-0xf7ffffff]
[    0.851852] bus 00 -> node 0
[    0.851858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.852134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.852259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.852383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.852502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.871023] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15), disabled.
[    0.871162] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.871300] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15), disabled.
[    0.871437] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15), disabled.
[    0.871573] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15), disabled.
[    0.871710] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15), disabled.
[    0.871847] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.871984] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15), disabled.
[    0.872135] ACPI: WMI: Mapper loaded
[    0.872194] SCSI subsystem initialized
[    0.872194] libata version 3.00 loaded.
[    0.872194] usbcore: registered new interface driver usbfs
[    0.872194] usbcore: registered new interface driver hub
[    0.872194] usbcore: registered new device driver usb
[    0.872194] PCI: Using ACPI for IRQ routing
[    0.910010] Bluetooth: Core ver 2.13
[    0.910026] NET: Registered protocol family 31
[    0.910026] Bluetooth: HCI device and connection manager initialized
[    0.910026] Bluetooth: HCI socket layer initialized
[    0.910026] NET: Registered protocol family 8
[    0.910026] NET: Registered protocol family 20
[    0.910037] NetLabel: Initializing
[    0.910038] NetLabel:  domain hash size = 128
[    0.910040] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.910054] NetLabel:  unlabeled traffic allowed by default
[    0.910096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.910101] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.940069] AppArmor: AppArmor Filesystem Enabled
[    0.950007] Switched to high resolution mode on CPU 0
[    0.950761] Switched to high resolution mode on CPU 2
[    0.950764] Switched to high resolution mode on CPU 3
[    0.950823] Switched to high resolution mode on CPU 1
[    0.970013] pnp: PnP ACPI init
[    0.970022] ACPI: bus type pnp registered
[    0.972730] pnp: PnP ACPI: found 11 devices
[    0.972732] ACPI: ACPI bus type pnp unregistered
[    0.972742] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.972745] system 00:01: ioport range 0x290-0x29f has been reserved
[    0.972747] system 00:01: ioport range 0x800-0x87f has been reserved
[    0.972750] system 00:01: ioport range 0x290-0x294 has been reserved
[    0.972753] system 00:01: ioport range 0x880-0x88f has been reserved
[    0.972760] system 00:07: ioport range 0x400-0x4bf could not be reserved
[    0.972767] system 00:08: iomem range 0xe8000000-0xebffffff has been reserved
[    0.972773] system 00:09: iomem range 0xd5000-0xd7fff has been reserved
[    0.972776] system 00:09: iomem range 0xf0000-0xf7fff could not be reserved
[    0.972779] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved
[    0.972781] system 00:09: iomem range 0xfc000-0xfffff could not be reserved
[    0.972784] system 00:09: iomem range 0xdfee0000-0xdfefffff could not be reserved
[    0.972787] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[    0.972789] system 00:09: iomem range 0x100000-0xdfedffff could not be reserved
[    0.972792] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.972795] system 00:09: iomem range 0xfed10000-0xfed1dfff has been reserved
[    0.972798] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.972800] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.972803] system 00:09: iomem range 0xffb00000-0xffb7ffff has been reserved
[    0.972805] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[    0.972808] system 00:09: iomem range 0xe0000-0xeffff has been reserved
[    0.977549] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.977552] pci 0000:00:01.0:   IO window: 0xb000-0xbfff
[    0.977556] pci 0000:00:01.0:   MEM window: 0xfa000000-0xfbffffff
[    0.977559] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000e7ffffff
[    0.977564] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.977567] pci 0000:00:1c.0:   IO window: 0xa000-0xafff
[    0.977572] pci 0000:00:1c.0:   MEM window: disabled
[    0.977575] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.977581] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[    0.977584] pci 0000:00:1c.3:   IO window: 0xc000-0xcfff
[    0.977589] pci 0000:00:1c.3:   MEM window: 0xfc000000-0xfc0fffff
[    0.977593] pci 0000:00:1c.3:   PREFETCH window: disabled
[    0.977599] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[    0.977602] pci 0000:00:1c.4:   IO window: 0xd000-0xdfff
[    0.977607] pci 0000:00:1c.4:   MEM window: 0xf8000000-0xf9ffffff
[    0.977611] pci 0000:00:1c.4:   PREFETCH window: 0x000000fc200000-0x000000fc2fffff
[    0.977617] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    0.977619] pci 0000:00:1e.0:   IO window: disabled
[    0.977623] pci 0000:00:1e.0:   MEM window: 0xec000000-0xf7ffffff
[    0.977627] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.977640] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.977644] pci 0000:00:01.0: setting latency timer to 64
[    0.977651] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.977655] pci 0000:00:1c.0: setting latency timer to 64
[    0.977662] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.977666] pci 0000:00:1c.3: setting latency timer to 64
[    0.977673] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.977677] pci 0000:00:1c.4: setting latency timer to 64
[    0.977683] pci 0000:00:1e.0: setting latency timer to 64
[    0.977687] bus: 00 index 0 io port: [0x00-0xffff]
[    0.977689] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.977691] bus: 01 index 0 io port: [0xb000-0xbfff]
[    0.977694] bus: 01 index 1 mmio: [0xfa000000-0xfbffffff]
[    0.977696] bus: 01 index 2 mmio: [0xe0000000-0xe7ffffff]
[    0.977697] bus: 01 index 3 mmio: [0x0-0x0]
[    0.977699] bus: 02 index 0 io port: [0xa000-0xafff]
[    0.977701] bus: 02 index 1 mmio: [0x0-0x0]
[    0.977703] bus: 02 index 2 mmio: [0x0-0x0]
[    0.977704] bus: 02 index 3 mmio: [0x0-0x0]
[    0.977706] bus: 03 index 0 io port: [0xc000-0xcfff]
[    0.977708] bus: 03 index 1 mmio: [0xfc000000-0xfc0fffff]
[    0.977710] bus: 03 index 2 mmio: [0x0-0x0]
[    0.977712] bus: 03 index 3 mmio: [0x0-0x0]
[    0.977714] bus: 04 index 0 io port: [0xd000-0xdfff]
[    0.977716] bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff]
[    0.977718] bus: 04 index 2 mmio: [0xfc200000-0xfc2fffff]
[    0.977720] bus: 04 index 3 mmio: [0x0-0x0]
[    0.977721] bus: 05 index 0 mmio: [0x0-0x0]
[    0.977723] bus: 05 index 1 mmio: [0xec000000-0xf7ffffff]
[    0.977725] bus: 05 index 2 mmio: [0x0-0x0]
[    0.977727] bus: 05 index 3 io port: [0x00-0xffff]
[    0.977729] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.977738] NET: Registered protocol family 2
[    1.060063] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.060635] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    1.062057] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.062494] TCP: Hash tables configured (established 262144 bind 65536)
[    1.062497] TCP reno registered
[    1.090121] NET: Registered protocol family 1
[    1.090252] checking if image is initramfs... it is
[    1.517527] Freeing initrd memory: 4490k freed
[    1.519240] audit: initializing netlink socket (disabled)
[    1.519258] type=2000 audit(1240353767.510:1): initialized
[    1.529934] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.531356] VFS: Disk quotas dquot_6.5.1
[    1.531411] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.532026] fuse init (API version 7.10)
[    1.532109] msgmni has been set to 15797
[    1.532298] alg: No test for stdrng (krng)
[    1.532312] io scheduler noop registered
[    1.532314] io scheduler anticipatory registered
[    1.532316] io scheduler deadline registered (default)
[    1.532360] io scheduler cfq registered
[    1.532502] pci 0000:01:00.0: Boot video device
[    1.535638] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.535672] pcieport-driver 0000:00:01.0: found MSI capability
[    1.535694] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[    1.535703] pci_express 0000:00:01.0:pcie00: allocate port service
[    1.535719] pci_express 0000:00:01.0:pcie03: allocate port service
[    1.535765] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.535797] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.535820] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[    1.535831] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.535845] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.535859] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.535913] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.535944] pcieport-driver 0000:00:1c.3: found MSI capability
[    1.535967] pcieport-driver 0000:00:1c.3: irq 2301 for MSI/MSI-X
[    1.535978] pci_express 0000:00:1c.3:pcie00: allocate port service
[    1.535991] pci_express 0000:00:1c.3:pcie02: allocate port service
[    1.536004] pci_express 0000:00:1c.3:pcie03: allocate port service
[    1.536057] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.536089] pcieport-driver 0000:00:1c.4: found MSI capability
[    1.536111] pcieport-driver 0000:00:1c.4: irq 2300 for MSI/MSI-X
[    1.536122] pci_express 0000:00:1c.4:pcie00: allocate port service
[    1.536135] pci_express 0000:00:1c.4:pcie02: allocate port service
[    1.536148] pci_express 0000:00:1c.4:pcie03: allocate port service
[    1.536214] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.536575] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.536717] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.536720] ACPI: Power Button (FF) [PWRF]
[    1.536765] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.536768] ACPI: Power Button (CM) [PWRB]
[    1.537266] ACPI: SSDT DFEE7F00, 022A (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
[    1.537543] processor ACPI_CPU:00: registered as cooling_device0
[    1.537549] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.537834] ACPI: SSDT DFEE83C0, 0152 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
[    1.538090] processor ACPI_CPU:01: registered as cooling_device1
[    1.538094] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.538339] ACPI: SSDT DFEE8520, 0152 (r1  PmRef  Cpu2Ist     3000 INTL 20040311)
[    1.538600] processor ACPI_CPU:02: registered as cooling_device2
[    1.538605] ACPI: Processor [CPU2] (supports 8 throttling states)
[    1.538862] ACPI: SSDT DFEE8680, 0152 (r1  PmRef  Cpu3Ist     3000 INTL 20040311)
[    1.539107] processor ACPI_CPU:03: registered as cooling_device3
[    1.539111] ACPI: Processor [CPU3] (supports 8 throttling states)
[    1.613953] Linux agpgart interface v0.103
[    1.613963] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.614979] brd: module loaded
[    1.615314] loop: module loaded
[    1.615384] Fixed MDIO Bus: probed
[    1.615389] PPP generic driver version 2.4.2
[    1.615450] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.615477] Driver 'sd' needs updating - please use bus_type methods
[    1.615487] Driver 'sr' needs updating - please use bus_type methods
[    1.615529] ahci 0000:00:1f.2: version 3.0
[    1.615539] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.615572] ahci 0000:00:1f.2: irq 2299 for MSI/MSI-X
[    1.615637] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.615641] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
[    1.615646] ahci 0000:00:1f.2: setting latency timer to 64
[    1.615942] scsi0 : ahci
[    1.616035] scsi1 : ahci
[    1.616102] scsi2 : ahci
[    1.616169] scsi3 : ahci
[    1.616236] scsi4 : ahci
[    1.616302] scsi5 : ahci
[    1.616428] ata1: SATA max UDMA/133 abar m2048@0xfc102000 port 0xfc102100 irq 2299
[    1.616432] ata2: SATA max UDMA/133 abar m2048@0xfc102000 port 0xfc102180 irq 2299
[    1.616435] ata3: SATA max UDMA/133 abar m2048@0xfc102000 port 0xfc102200 irq 2299
[    1.616438] ata4: SATA max UDMA/133 abar m2048@0xfc102000 port 0xfc102280 irq 2299
[    1.616440] ata5: SATA max UDMA/133 abar m2048@0xfc102000 port 0xfc102300 irq 2299
[    1.616443] ata6: SATA max UDMA/133 abar m2048@0xfc102000 port 0xfc102380 irq 2299
[    2.140021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.180741] ata1.00: ATA-7: ST3500630AS, 3.AAM, max UDMA/133
[    2.180744] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.239067] ata1.00: configured for UDMA/133
[    2.780021] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.830196] ata2.00: ATA-7: ST3500630AS, 3.AAM, max UDMA/133
[    2.830200] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.888514] ata2.00: configured for UDMA/133
[    3.430021] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.474035] ata3.00: ATA-7: ST3500630AS, 3.AAM, max UDMA/133
[    3.474038] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.532363] ata3.00: configured for UDMA/133
[    4.080016] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.081379] ata4.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[    4.081382] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.083164] ata4.00: configured for UDMA/133
[    4.630024] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.631474] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[    4.631477] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.633416] ata5.00: configured for UDMA/133
[    5.180021] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.181362] ata6.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[    5.181365] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    5.183101] ata6.00: configured for UDMA/133
[    5.200098] scsi 0:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
[    5.200195] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.200212] sd 0:0:0:0: [sda] Write Protect is off
[    5.200215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.200242] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.200305] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.200321] sd 0:0:0:0: [sda] Write Protect is off
[    5.200323] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.200349] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.200353]  sda: sda1
[    5.219350] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.219415] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.219508] scsi 1:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
[    5.219604] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.219621] sd 1:0:0:0: [sdb] Write Protect is off
[    5.219624] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.219651] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.219708] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.219723] sd 1:0:0:0: [sdb] Write Protect is off
[    5.219726] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.219752] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.219756]  sdb: sdb1
[    5.235718] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.235758] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.235832] scsi 2:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
[    5.235921] sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.235937] sd 2:0:0:0: [sdc] Write Protect is off
[    5.235940] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.235967] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.236026] sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.236042] sd 2:0:0:0: [sdc] Write Protect is off
[    5.236044] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.236071] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.236075]  sdc: sdc1
[    5.254885] sd 2:0:0:0: [sdc] Attached SCSI disk
[    5.254933] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    5.255005] scsi 3:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
[    5.255101] sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.255117] sd 3:0:0:0: [sdd] Write Protect is off
[    5.255120] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    5.255147] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.255202] sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.255217] sd 3:0:0:0: [sdd] Write Protect is off
[    5.255219] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    5.255246] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.255250]  sdd: sdd1
[    5.277037] sd 3:0:0:0: [sdd] Attached SCSI disk
[    5.277079] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    5.277155] scsi 4:0:0:0: Direct-Access     ATA      ST31000340AS     SD15 PQ: 0 ANSI: 5
[    5.277244] sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[    5.277260] sd 4:0:0:0: [sde] Write Protect is off
[    5.277263] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    5.277290] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.277349] sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[    5.277365] sd 4:0:0:0: [sde] Write Protect is off
[    5.277367] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    5.277394] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.277397]  sde: sde1
[    5.295769] sd 4:0:0:0: [sde] Attached SCSI disk
[    5.295814] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    5.295885] scsi 5:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
[    5.295975] sd 5:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.295991] sd 5:0:0:0: [sdf] Write Protect is off
[    5.295993] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[    5.296019] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.296072] sd 5:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    5.296088] sd 5:0:0:0: [sdf] Write Protect is off
[    5.296090] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[    5.296116] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.296120]  sdf: sdf1
[    5.310949] sd 5:0:0:0: [sdf] Attached SCSI disk
[    5.310988] sd 5:0:0:0: Attached scsi generic sg5 type 0
[    5.311024] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    5.331284] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    5.331288] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    5.331294] ahci 0000:03:00.0: setting latency timer to 64
[    5.331460] scsi6 : ahci
[    5.331528] scsi7 : ahci
[    5.331605] ata7: SATA max UDMA/133 abar m8192@0xfc000000 port 0xfc000100 irq 19
[    5.331609] ata8: SATA max UDMA/133 abar m8192@0xfc000000 port 0xfc000180 irq 19
[    5.860030] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.861192] ata7.00: ATA-6: ST3250310NS, SN04, max UDMA/133
[    5.861194] ata7.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    5.862791] ata7.00: configured for UDMA/133
[    6.230025] ata8: SATA link down (SStatus 0 SControl 300)
[    6.250080] scsi 6:0:0:0: Direct-Access     ATA      ST3250310NS      SN04 PQ: 0 ANSI: 5
[    6.250180] sd 6:0:0:0: [sdg] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    6.250197] sd 6:0:0:0: [sdg] Write Protect is off
[    6.250199] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[    6.250229] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.250286] sd 6:0:0:0: [sdg] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    6.250301] sd 6:0:0:0: [sdg] Write Protect is off
[    6.250304] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[    6.250330] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.250334]  sdg: sdg1 sdg2 < sdg5 sdg6 >
[    6.287866] sd 6:0:0:0: [sdg] Attached SCSI disk
[    6.287908] sd 6:0:0:0: Attached scsi generic sg6 type 0
[    6.288308] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    6.288335] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    6.288406] scsi8 : pata_jmicron
[    6.288472] scsi9 : pata_jmicron
[    6.289210] ata9: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[    6.289213] ata10: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[    6.611862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.611882] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.611894] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    6.611897] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    6.611959] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    6.615875] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    6.615889] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc101000
[    6.630011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    6.630075] usb usb1: configuration #1 chosen from 1 choice
[    6.630104] hub 1-0:1.0: USB hub found
[    6.630112] hub 1-0:1.0: 6 ports detected
[    6.630218] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.630228] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    6.630231] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    6.630275] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    6.634190] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    6.634202] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc100000
[    6.650010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    6.650066] usb usb2: configuration #1 chosen from 1 choice
[    6.650092] hub 2-0:1.0: USB hub found
[    6.650099] hub 2-0:1.0: 6 ports detected
[    6.650195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.650210] uhci_hcd: USB Universal Host Controller Interface driver
[    6.650244] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.650250] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    6.650254] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    6.650295] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    6.650317] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[    6.650395] usb usb3: configuration #1 chosen from 1 choice
[    6.650420] hub 3-0:1.0: USB hub found
[    6.650427] hub 3-0:1.0: 2 ports detected
[    6.650513] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    6.650519] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    6.650522] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    6.650576] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    6.650605] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[    6.650677] usb usb4: configuration #1 chosen from 1 choice
[    6.650705] hub 4-0:1.0: USB hub found
[    6.650711] hub 4-0:1.0: 2 ports detected
[    6.650798] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.650803] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    6.650806] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    6.650850] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    6.650872] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[    6.650950] usb usb5: configuration #1 chosen from 1 choice
[    6.650975] hub 5-0:1.0: USB hub found
[    6.650981] hub 5-0:1.0: 2 ports detected
[    6.651066] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.651071] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    6.651074] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    6.651117] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    6.651138] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    6.651211] usb usb6: configuration #1 chosen from 1 choice
[    6.651236] hub 6-0:1.0: USB hub found
[    6.651242] hub 6-0:1.0: 2 ports detected
[    6.651336] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.651341] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    6.651344] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    6.651385] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    6.651407] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[    6.651484] usb usb7: configuration #1 chosen from 1 choice
[    6.651509] hub 7-0:1.0: USB hub found
[    6.651515] hub 7-0:1.0: 2 ports detected
[    6.651598] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.651603] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    6.651607] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    6.651650] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    6.651672] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[    6.651746] usb usb8: configuration #1 chosen from 1 choice
[    6.651775] hub 8-0:1.0: USB hub found
[    6.651781] hub 8-0:1.0: 2 ports detected
[    6.651922] usbcore: registered new interface driver libusual
[    6.651955] usbcore: registered new interface driver usbserial
[    6.651965] USB Serial support registered for generic
[    6.651984] usbcore: registered new interface driver usbserial_generic
[    6.651986] usbserial: USB Serial Driver core
[    6.652034] PNP: No PS/2 controller found. Probing ports directly.
[    6.652322] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.652328] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.681293] mice: PS/2 mouse device common for all mice
[    6.771324] rtc_cmos 00:04: RTC can wake from S4
[    6.771360] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    6.771383] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    6.771448] device-mapper: uevent: version 1.0.3
[    6.771534] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    6.771679] device-mapper: multipath: version 1.0.5 loaded
[    6.771682] device-mapper: multipath round-robin: version 1.0.0 loaded
[    6.771842] cpuidle: using governor ladder
[    6.771845] cpuidle: using governor menu
[    6.772288] TCP cubic registered
[    6.772357] NET: Registered protocol family 10
[    6.772779] lo: Disabled Privacy Extensions
[    6.773089] NET: Registered protocol family 17
[    6.773107] Bluetooth: L2CAP ver 2.11
[    6.773109] Bluetooth: L2CAP socket layer initialized
[    6.773112] Bluetooth: SCO (Voice Link) ver 0.6
[    6.773113] Bluetooth: SCO socket layer initialized
[    6.773151] Bluetooth: RFCOMM socket layer initialized
[    6.773157] Bluetooth: RFCOMM TTY layer initialized
[    6.773159] Bluetooth: RFCOMM ver 1.10
[    6.778359] registered taskstats version 1
[    6.778471]   Magic number: 5:584:755
[    6.778550] rtc_cmos 00:04: setting system clock to 2009-04-21 22:42:53 UTC (1240353773)
[    6.778553] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    6.778554] EDD information not available.
[    6.778585] Freeing unused kernel memory: 536k freed
[    6.778723] Write protecting the kernel read-only data: 6708k
[    6.844738] md: linear personality registered for level -1
[    6.846314] md: multipath personality registered for level -4
[    6.847556] md: raid0 personality registered for level 0
[    6.849569] md: raid1 personality registered for level 1
[    6.850658] xor: automatically using best checksumming function: generic_sse
[    6.900003]    generic_sse:  8944.000 MB/sec
[    6.900005] xor: using function: generic_sse (8944.000 MB/sec)
[    6.900820] async_tx: api initialized (async)
[    7.070036] raid6: int64x1   1923 MB/s
[    7.240021] raid6: int64x2   2642 MB/s
[    7.253779] usb 2-5: new high speed USB device using ehci_hcd and address 3
[    7.410027] raid6: int64x4   2018 MB/s
[    7.429358] usb 2-5: configuration #1 chosen from 1 choice
[    7.580037] raid6: int64x8   1793 MB/s
[    7.703778] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    7.750013] raid6: sse2x1    3778 MB/s
[    7.881475] usb 3-2: configuration #1 chosen from 1 choice
[    7.920007] raid6: sse2x2    4305 MB/s
[    8.090009] raid6: sse2x4    7146 MB/s
[    8.090010] raid6: using algorithm sse2x4 (7146 MB/s)
[    8.090012] md: raid6 personality registered for level 6
[    8.090013] md: raid5 personality registered for level 5
[    8.090014] md: raid4 personality registered for level 4
[    8.094522] md: raid10 personality registered for level 10
[    8.172585] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    8.274175] md: bind<sdd1>
[    8.284744] md: bind<sda1>
[    8.294960] md: bind<sdc1>
[    8.300681] md: bind<sdb1>
[    8.302394] raid5: device sdb1 operational as raid disk 1
[    8.302396] raid5: device sdc1 operational as raid disk 2
[    8.302398] raid5: device sda1 operational as raid disk 0
[    8.302399] raid5: device sdd1 operational as raid disk 3
[    8.302822] raid5: allocated 4288kB for md0
[    8.302824] raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2
[    8.302825] RAID5 conf printout:
[    8.302826]  --- rd:4 wd:4
[    8.302828]  disk 0, o:1, dev:sda1
[    8.302829]  disk 1, o:1, dev:sdb1
[    8.302830]  disk 2, o:1, dev:sdc1
[    8.302831]  disk 3, o:1, dev:sdd1
[    8.304121]  md0: unknown partition table
[    8.350834] usb 4-1: configuration #1 chosen from 1 choice
[    8.633774] usb 7-1: new full speed USB device using uhci_hcd and address 2
[    8.727063] PM: Starting manual resume from disk
[    8.727066] PM: Resume from partition 8:101
[    8.727067] PM: Checking hibernation image.
[    8.728322] PM: Resume from disk failed.
[    8.751058] kjournald starting.  Commit interval 5 seconds
[    8.751077] EXT3-fs: mounted filesystem with ordered data mode.
[    8.809666] usb 7-1: configuration #1 chosen from 1 choice
[    9.686071] udev: starting version 141
[   10.034596] Linux video capture interface: v2.00
[   10.070554] lirc_dev: IR Remote Control driver registered, major 61 
[   10.091873] hdpvr 2-5:1.0: untested firmware version 0xf, the driver might not work
[   10.093198] iTCO_vendor_support: vendor-support=0
[   10.177185] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   10.177309] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[   10.177360] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.178876] commandir: CommandIR USB device now attached to commandir0
[   10.178879] commandir: commandir0 reset
[   10.178880] commandir: COMMANDIR0:
[   10.178880]  TX Enabled: 1, 2, 3, 4
[   10.178881]  RX: commandir0
[   10.178881]  LCD: commandir0
[   10.178892] usbcore: registered new interface driver commandir
[   10.180513] 
[   10.180515] lirc_mceusb2: Philips eHome USB IR Transceiver and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.44 $
[   10.180517] lirc_mceusb2: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>
[   10.227431] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   10.285615] usbcore: registered new interface driver hiddev
[   10.285665] usbcore: registered new interface driver usbhid
[   10.285667] usbhid: v2.6:USB HID core driver
[   10.302570] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[   10.336348] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.336381] r8169 0000:04:00.0: enabling device (0000 -> 0003)
[   10.336387] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.336405] r8169 0000:04:00.0: setting latency timer to 64
[   10.336505] r8169 0000:04:00.0: irq 2298 for MSI/MSI-X
[   10.336942] eth0: RTL8168b/8111b at 0xffffc2000007e000, 00:1d:7d:01:a2:5b, XID 38000000 IRQ 2298
[   10.414160] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4
[   10.441097] hdpvr 2-5:1.0: device now attached to /dev/video0
[   10.441116] usbcore: registered new interface driver hdpvr
[   10.451221] cx18:  Start initialization, version 1.2.0
[   10.451265] cx18-0: Initializing card 0
[   10.451267] cx18-0: Autodetected Hauppauge card
[   10.452343] cx18 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   10.454675] cx18-0: cx23418 revision 01010000 (B)
[   10.473623] lirc_dev: lirc_register_plugin: sample_rate: 0
[   10.477621] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb3:2
[   10.477662] usbcore: registered new interface driver lirc_mceusb2
[   10.483975] dell 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.1-1/input0
[   10.663090] tveeprom 0-0050: Hauppauge model 74041, rev C5B2, serial# 3093910
[   10.663093] tveeprom 0-0050: MAC address is 00-0D-FE-2F-35-96
[   10.663095] tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
[   10.663097] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
[   10.663099] tveeprom 0-0050: audio processor is CX23418 (idx 38)
[   10.663100] tveeprom 0-0050: decoder processor is CX23418 (idx 31)
[   10.663102] tveeprom 0-0050: has no radio, has IR receiver, has IR transmitter
[   10.663103] cx18-0: Autodetected Hauppauge HVR-1600
[   10.663105] cx18-0: Simultaneous Digital and Analog TV capture supported
[   10.759526] tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
[   10.761261] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[   10.806452] tuner-simple 1-0061: creating new instance
[   10.806454] tuner-simple 1-0061: type set to 50 (TCL 2002N)
[   10.811372] cx18-0: Registered device video1 for encoder MPEG (64 x 32 kB)
[   10.811376] DVB: registering new adapter (cx18)
[   10.897187] MXL5005S: Attached at address 0x63
[   10.897190] DVB: registering adapter 0 frontend 14906 (Samsung S5H1409 QAM/8VSB Frontend)...
[   10.897249] cx18-0: DVB Frontend registered
[   10.897250] cx18-0: Registered DVB adapter0 for TS (32 x 32 kB)
[   10.897279] cx18-0: Registered device video33 for encoder YUV (16 x 128 kB)
[   10.897311] cx18-0: Registered device vbi1 for encoder VBI (20 x 51984 bytes)
[   10.897340] cx18-0: Registered device video25 for encoder PCM audio (256 x 4 kB)
[   10.897342] cx18-0: Initialized card: Hauppauge HVR-1600
[   10.897380] cx18-1: Initializing card 1
[   10.897383] cx18-1: Autodetected Hauppauge card
[   10.897617] cx18 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   10.899853] cx18-1: cx23418 revision 01010000 (B)
[   11.091849] tveeprom 2-0050: Hauppauge model 74041, rev C6B2, serial# 924175
[   11.091852] tveeprom 2-0050: MAC address is 00-0D-FE-0E-1A-0F
[   11.091854] tveeprom 2-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
[   11.091856] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
[   11.091857] tveeprom 2-0050: audio processor is CX23418 (idx 38)
[   11.091859] tveeprom 2-0050: decoder processor is CX23418 (idx 31)
[   11.091860] tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
[   11.091862] cx18-1: Autodetected Hauppauge HVR-1600
[   11.091864] cx18-1: Simultaneous Digital and Analog TV capture supported
[   11.179598] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #1-1)
[   11.180386] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #1-0)
[   11.182457] tuner-simple 3-0061: creating new instance
[   11.182459] tuner-simple 3-0061: type set to 50 (TCL 2002N)
[   11.187467] cx18-1: Registered device video2 for encoder MPEG (64 x 32 kB)
[   11.187472] DVB: registering new adapter (cx18)
[   11.233029] MXL5005S: Attached at address 0x63
[   11.233032] DVB: registering adapter 1 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[   11.233079] cx18-1: DVB Frontend registered
[   11.233081] cx18-1: Registered DVB adapter1 for TS (32 x 32 kB)
[   11.233106] cx18-1: Registered device video34 for encoder YUV (16 x 128 kB)
[   11.233128] cx18-1: Registered device vbi2 for encoder VBI (20 x 51984 bytes)
[   11.233145] cx18-1: Registered device video26 for encoder PCM audio (256 x 4 kB)
[   11.233147] cx18-1: Initialized card: Hauppauge HVR-1600
[   11.233177] cx18-2: Initializing card 2
[   11.233179] cx18-2: Autodetected Hauppauge card
[   11.233419] cx18 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.235605] cx18-2: cx23418 revision 01010000 (B)
[   11.431869] tveeprom 4-0050: Hauppauge model 74041, rev C6B2, serial# 922606
[   11.431872] tveeprom 4-0050: MAC address is 00-0D-FE-0E-13-EE
[   11.431874] tveeprom 4-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
[   11.431876] tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08)
[   11.431877] tveeprom 4-0050: audio processor is CX23418 (idx 38)
[   11.431879] tveeprom 4-0050: decoder processor is CX23418 (idx 31)
[   11.431880] tveeprom 4-0050: has no radio, has IR receiver, has IR transmitter
[   11.431882] cx18-2: Autodetected Hauppauge HVR-1600
[   11.431883] cx18-2: Simultaneous Digital and Analog TV capture supported
[   11.519545] tuner 5-0061: chip found @ 0xc2 (cx18 i2c driver #2-1)
[   11.520338] cs5345 4-004c: chip found @ 0x98 (cx18 i2c driver #2-0)
[   11.522419] tuner-simple 5-0061: creating new instance
[   11.522421] tuner-simple 5-0061: type set to 50 (TCL 2002N)
[   11.527593] cx18-2: Registered device video3 for encoder MPEG (64 x 32 kB)
[   11.527598] DVB: registering new adapter (cx18)
[   11.573246] MXL5005S: Attached at address 0x63
[   11.573249] DVB: registering adapter 2 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[   11.573300] cx18-2: DVB Frontend registered
[   11.573302] cx18-2: Registered DVB adapter2 for TS (32 x 32 kB)
[   11.573341] cx18-2: Registered device video35 for encoder YUV (16 x 128 kB)
[   11.573367] cx18-2: Registered device vbi3 for encoder VBI (20 x 51984 bytes)
[   11.573399] cx18-2: Registered device video27 for encoder PCM audio (256 x 4 kB)
[   11.573406] cx18-2: Initialized card: Hauppauge HVR-1600
[   11.573426] cx18:  End initialization
[   11.711215] lp: driver loaded but no devices found
[   11.859655] Adding 9711252k swap on /dev/sdg5.  Priority:-1 extents:1 across:9711252k
[   12.135098] EXT3 FS on sdg1, internal journal
[   12.956000] kjournald starting.  Commit interval 5 seconds
[   12.956443] EXT3 FS on sdg6, internal journal
[   12.956449] EXT3-fs: mounted filesystem with ordered data mode.
[   13.037557] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   13.038029] SGI XFS Quota Management subsystem
[   13.042191] Filesystem "dm-0": Disabling barriers, trial barrier write failed
[   13.042363] XFS mounting filesystem dm-0
[   13.217576] Ending clean XFS mount for filesystem: dm-0
[   13.275781] XFS mounting filesystem sdf1
[   13.342447] Ending clean XFS mount for filesystem: sdf1
[   13.385475] XFS mounting filesystem sde1
[   13.560434] Ending clean XFS mount for filesystem: sde1
[   13.910411] type=1505 audit(1240353780.631:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2424
[   13.910489] type=1505 audit(1240353780.631:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2424
[   13.910518] type=1505 audit(1240353780.631:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2424
[   13.910546] type=1505 audit(1240353780.631:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2424
[   13.946654] type=1505 audit(1240353780.661:6): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2429
[   13.966251] type=1505 audit(1240353780.681:7): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2433
[   14.443734] r8169: eth0: link up
[   14.443743] r8169: eth0: link up
[   19.115531] warning: `jsvc' uses 32-bit capabilities (legacy support in use)
[   24.930046] eth0: no IPv6 routers present
[   91.791281] usbcore: deregistering interface driver commandir
[   91.791360] commandir: CommandIR #0 now disconnected
[  993.333784] cx18 0000:05:00.0: firmware: requesting v4l-cx23418-cpu.fw
[  993.503474] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
[  993.528666] cx18 0000:05:00.0: firmware: requesting v4l-cx23418-apu.fw
[  993.632683] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
[  993.638857] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
[  993.852518] cx18 0000:05:00.0: firmware: requesting v4l-cx23418-cpu.fw
[  993.989445] cx18 0000:05:00.0: firmware: requesting v4l-cx23418-apu.fw
[  994.301675] cx18 0000:05:00.0: firmware: requesting v4l-cx23418-dig.fw
[  994.489814] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[  994.511270] cx18 0000:05:02.0: firmware: requesting v4l-cx23418-cpu.fw
[  994.623043] cx18-2: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
[  994.648217] cx18 0000:05:02.0: firmware: requesting v4l-cx23418-apu.fw
[  994.748227] cx18-2: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
[  994.754432] cx18-2: FW version: 0.0.74.0 (Release 2007/03/12)
[  994.963768] cx18 0000:05:02.0: firmware: requesting v4l-cx23418-cpu.fw
[  995.100808] cx18 0000:05:02.0: firmware: requesting v4l-cx23418-apu.fw
[  995.411686] cx18 0000:05:02.0: firmware: requesting v4l-cx23418-dig.fw
[  995.599223] cx18-2 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[  995.613772] cx18 0000:05:01.0: firmware: requesting v4l-cx23418-cpu.fw
[  995.725667] cx18-1: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
[  995.750852] cx18 0000:05:01.0: firmware: requesting v4l-cx23418-apu.fw
[  995.850983] cx18-1: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
[  995.857174] cx18-1: FW version: 0.0.74.0 (Release 2007/03/12)
[  996.071268] cx18 0000:05:01.0: firmware: requesting v4l-cx23418-cpu.fw
[  996.208448] cx18 0000:05:01.0: firmware: requesting v4l-cx23418-apu.fw
[  996.521687] cx18 0000:05:01.0: firmware: requesting v4l-cx23418-dig.fw
[  996.799142] cx18-1 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 5140.925547] cx18-1: Could not find buf 55 for stream encoder MPEG
[ 5142.592319] cx18-1: Skipped encoder MPEG, buffer 58, 62 times - it must have dropped out of rotation
[ 6237.333368] cx18-1: Could not find buf 41 for stream encoder MPEG
[ 6238.929535] cx18-1: Skipped encoder MPEG, buffer 46, 62 times - it must have dropped out of rotation
[48578.367233] cx18-1: Could not find buf 25 for stream encoder MPEG
[48580.075954] cx18-1: Skipped encoder MPEG, buffer 37, 62 times - it must have dropped out of rotation
[49659.446542] cx18-1: Could not find buf 53 for stream encoder MPEG
[49661.150358] cx18-1: Skipped encoder MPEG, buffer 40, 62 times - it must have dropped out of rotation
[50198.520298] cx18-1: Could not find buf 26 for stream encoder MPEG
[50200.050726] cx18-1: Skipped encoder MPEG, buffer 22, 62 times - it must have dropped out of rotation
[53444.586909] cx18-1: Could not find buf 57 for stream encoder MPEG
[53446.185617] cx18-1: Skipped encoder MPEG, buffer 56, 62 times - it must have dropped out of rotation
[53597.641340] cx18-1: Could not find buf 21 for stream encoder MPEG
[53599.308153] cx18-1: Skipped encoder MPEG, buffer 23, 62 times - it must have dropped out of rotation
[53763.493677] cx18-1: Could not find buf 61 for stream encoder MPEG
[53765.053305] cx18-1: Skipped encoder MPEG, buffer 53, 62 times - it must have dropped out of rotation
[54014.762622] cx18-1: Could not find buf 7 for stream encoder MPEG
[54016.322895] cx18-1: Skipped encoder MPEG, buffer 14, 62 times - it must have dropped out of rotation
[54287.367919] cx18-1: Could not find buf 76 for stream encoder MPEG
[54289.079562] cx18-1: Skipped encoder MPEG, buffer 38, 62 times - it must have dropped out of rotation
[54797.347418] cx18-1: Could not find buf 6 for stream encoder MPEG
[54798.946748] cx18-1: Skipped encoder MPEG, buffer 1, 62 times - it must have dropped out of rotation
[55128.163261] cx18-1: Could not find buf 27 for stream encoder MPEG
[55129.696297] cx18-1: Skipped encoder MPEG, buffer 9, 62 times - it must have dropped out of rotation
[55137.986425] cx18-1: Could not find buf 1 for stream encoder MPEG
[55139.579677] cx18-1: Skipped encoder MPEG, buffer 7, 62 times - it must have dropped out of rotation
[55308.356176] cx18-1: Could not find buf 1 for stream encoder MPEG
[55309.959584] cx18-1: Skipped encoder MPEG, buffer 4, 62 times - it must have dropped out of rotation
[55471.027440] cx18-1: Could not find buf 26 for stream encoder MPEG
[55472.728090] cx18-1: Skipped encoder MPEG, buffer 37, 62 times - it must have dropped out of rotation
[57028.612223] cx18-1: Could not find buf 39 for stream encoder MPEG
[57030.381066] cx18-1: Skipped encoder MPEG, buffer 19, 62 times - it must have dropped out of rotation
[59347.157882] cx18-1: Could not find buf 61 for stream encoder MPEG
[59348.749296] cx18-1: Skipped encoder MPEG, buffer 0, 62 times - it must have dropped out of rotation
[59668.287411] cx18-1: Could not find buf 95 for stream TS
[59670.196845] cx18-1: Skipped encoder MPEG, buffer 45, 62 times - it must have dropped out of rotation
[59870.973992] cx18-1: Could not find buf 23 for stream encoder MPEG
[59872.472316] cx18-1: Skipped encoder MPEG, buffer 27, 62 times - it must have dropped out of rotation
[61384.517170] cx18-1: Could not find buf 40 for stream encoder MPEG
[61386.218680] cx18-1: Skipped encoder MPEG, buffer 44, 62 times - it must have dropped out of rotation
[61617.263811] cx18-1: Could not find buf 20 for stream encoder MPEG
[61618.967521] cx18-1: Skipped encoder MPEG, buffer 31, 62 times - it must have dropped out of rotation
[61834.804759] cx18-1: Could not find buf 4 for stream encoder MPEG
[61836.331478] cx18-1: Skipped encoder MPEG, buffer 8, 62 times - it must have dropped out of rotation
[61874.036062] cx18-1: Could not find buf 56 for stream encoder MPEG
[61875.534409] cx18-1: Skipped encoder MPEG, buffer 49, 62 times - it must have dropped out of rotation
[62042.682208] cx18-1: Could not find buf 23 for stream encoder MPEG
[62044.215598] cx18-1: Skipped encoder MPEG, buffer 10, 62 times - it must have dropped out of rotation
[62503.779280] cx18-1: Could not find buf 32 for stream encoder MPEG
[62505.474694] cx18-1: Skipped encoder MPEG, buffer 54, 62 times - it must have dropped out of rotation
[62563.143844] cx18-1: Could not find buf 31 for stream encoder MPEG
[62564.767119] cx18-1: Skipped encoder MPEG, buffer 0, 62 times - it must have dropped out of rotation
[62576.247488] cx18-1: Could not find buf 16 for stream encoder MPEG
[62578.015527] cx18-1: Skipped encoder MPEG, buffer 12, 62 times - it must have dropped out of rotation
[62613.286737] cx18-1: Could not find buf 24 for stream encoder MPEG
[62614.990762] cx18-1: Skipped encoder MPEG, buffer 37, 62 times - it must have dropped out of rotation
[62638.279880] cx18-1: Could not find buf 47 for stream encoder MPEG
[62639.983500] cx18-1: Skipped encoder MPEG, buffer 44, 62 times - it must have dropped out of rotation
[67737.430495] cx18-1: Could not find buf 93 for stream encoder MPEG
[67739.236454] cx18-1: Skipped encoder MPEG, buffer 47, 62 times - it must have dropped out of rotation
[68121.720689] cx18-1: Could not find buf 41 for stream encoder MPEG
[68123.305611] cx18-1: Skipped encoder MPEG, buffer 25, 62 times - it must have dropped out of rotation
[68468.679655] cx18-1: Could not find buf 36 for stream encoder MPEG
[68470.281870] cx18-1: Skipped encoder MPEG, buffer 44, 62 times - it must have dropped out of rotation
[68767.574077] cx18-1: Could not find buf 63 for stream encoder MPEG
[68769.202885] cx18-1: Skipped encoder MPEG, buffer 18, 62 times - it must have dropped out of rotation
[80220.657175] cx18-1: Could not find buf 82 for stream encoder MPEG
[80222.232283] cx18-1: Skipped encoder MPEG, buffer 11, 62 times - it must have dropped out of rotation
[80293.206355] cx18-1: Could not find buf 51 for stream encoder MPEG
[80294.874302] cx18-1: Skipped encoder MPEG, buffer 48, 62 times - it must have dropped out of rotation
[80444.367677] cx18-1: Could not find buf 50 for stream encoder MPEG
[80445.971721] cx18-1: Skipped encoder MPEG, buffer 0, 62 times - it must have dropped out of rotation
[80988.119725] cx18-1: Could not find buf 18 for stream encoder MPEG
[80989.940278] cx18-1: Skipped encoder MPEG, buffer 63, 62 times - it must have dropped out of rotation
[81387.304049] cx18-1: Could not find buf 25 for stream encoder MPEG
[81388.908157] cx18-1: Skipped encoder MPEG, buffer 46, 62 times - it must have dropped out of rotation
[82302.242424] cx18-1: Could not find buf 11 for stream encoder MPEG
[82303.741541] cx18-1: Skipped encoder MPEG, buffer 4, 62 times - it must have dropped out of rotation
[82974.923220] cx18-1: Could not find buf 22 for stream encoder MPEG
[82976.452077] cx18-1: Skipped encoder MPEG, buffer 7, 62 times - it must have dropped out of rotation
[83553.844995] cx18-1: Could not find buf 25 for stream encoder MPEG
[83555.370846] cx18-1: Skipped encoder MPEG, buffer 19, 62 times - it must have dropped out of rotation
[84804.289508] cx18-1: Could not find buf 12 for stream encoder MPEG
[84805.790944] cx18-1: Skipped encoder MPEG, buffer 10, 62 times - it must have dropped out of rotation
[85014.011653] cx18-1: Could not find buf 41 for stream encoder MPEG
[85015.542420] cx18-1: Skipped encoder MPEG, buffer 50, 62 times - it must have dropped out of rotation
[85036.035066] cx18-1: Could not find buf 59 for stream encoder MPEG
[85037.736591] cx18-1: Skipped encoder MPEG, buffer 50, 62 times - it must have dropped out of rotation
[85584.788642] cx18-1: Could not find buf 81 for stream encoder MPEG
[85586.285346] cx18-1: Skipped encoder MPEG, buffer 20, 62 times - it must have dropped out of rotation
[85783.793620] cx18-1: Could not find buf 63 for stream encoder MPEG
[85785.459943] cx18-1: Skipped encoder MPEG, buffer 12, 62 times - it must have dropped out of rotation
[85976.463337] cx18-1: Could not find buf 7 for stream encoder MPEG
[85978.163892] cx18-1: Skipped encoder MPEG, buffer 53, 62 times - it must have dropped out of rotation
[86328.747482] cx18-1: Could not find buf 59 for stream encoder MPEG
[86330.367567] cx18-1: Skipped encoder MPEG, buffer 35, 62 times - it must have dropped out of rotation
[86865.375143] cx18-1: Could not find buf 22 for stream encoder MPEG
[86867.142436] cx18-1: Skipped encoder MPEG, buffer 48, 62 times - it must have dropped out of rotation
[87115.942313] cx18-1: Skipped encoder MPEG, buffer 56, 62 times - it must have dropped out of rotation
[87120.754352] cx18-1: Could not find buf 35 for stream encoder MPEG
[87122.313728] cx18-1: Skipped encoder MPEG, buffer 50, 62 times - it must have dropped out of rotation
[87126.921042] cx18-1: Skipped encoder MPEG, buffer 50, 62 times - it must have dropped out of rotation
[143340.327040] cx18-1: Could not find buf 3 for stream encoder MPEG
[143342.117568] cx18-1: Skipped encoder MPEG, buffer 11, 62 times - it must have dropped out of rotation
[143564.353789] cx18-1: Could not find buf 3 for stream encoder MPEG
[143565.890246] cx18-1: Skipped encoder MPEG, buffer 23, 62 times - it must have dropped out of rotation
[143695.495455] cx18-1: Could not find buf 24 for stream encoder MPEG
[143695.996665] cx18-1: Could not find buf 56 for stream encoder MPEG
[143697.193950] cx18-1: Skipped encoder MPEG, buffer 17, 62 times - it must have dropped out of rotation
[143697.695271] cx18-1: Skipped encoder MPEG, buffer 33, 62 times - it must have dropped out of rotation
[144552.346368] cx18-1: Could not find buf 45 for stream encoder MPEG
[144553.877590] cx18-1: Skipped encoder MPEG, buffer 48, 62 times - it must have dropped out of rotation
[144706.010071] cx18-1: Could not find buf 56 for stream encoder MPEG
[144707.537182] cx18-1: Skipped encoder MPEG, buffer 47, 62 times - it must have dropped out of rotation
[149280.088741] cx18-1: Could not find buf 10 for stream encoder MPEG
[149281.584908] cx18-1: Skipped encoder MPEG, buffer 9, 62 times - it must have dropped out of rotation
[151079.511936] cx18-1: Could not find buf 35 for stream encoder MPEG
[151081.107109] cx18-1: Skipped encoder MPEG, buffer 51, 62 times - it must have dropped out of rotation
[151247.484260] cx18-1: Could not find buf 25 for stream encoder MPEG
[151249.321160] cx18-1: Skipped encoder MPEG, buffer 24, 62 times - it must have dropped out of rotation
[151771.627968] cx18-1: Could not find buf 46 for stream encoder MPEG
[151773.290663] cx18-1: Skipped encoder MPEG, buffer 25, 62 times - it must have dropped out of rotation
[175952.749839] cx18-1: Could not find buf 25 for stream encoder MPEG
[175954.310146] cx18-1: Skipped encoder MPEG, buffer 38, 62 times - it must have dropped out of rotation
[176868.696980] cx18-1: Could not find buf 62 for stream encoder MPEG
[176870.292951] cx18-1: Skipped encoder MPEG, buffer 46, 62 times - it must have dropped out of rotation
[181816.054436] cx18-1: Could not find buf 21 for stream encoder MPEG
[181817.460615] cx18-1: Skipped encoder MPEG, buffer 44, 61 times - it must have dropped out of rotation
[183647.329887] cx18-1: Could not find buf 92 for stream TS
[183649.127868] cx18-1: Skipped encoder MPEG, buffer 46, 62 times - it must have dropped out of rotation
[184320.119054] cx18-1: Could not find buf 24 for stream encoder MPEG
[184321.677989] cx18-1: Skipped encoder MPEG, buffer 6, 62 times - it must have dropped out of rotation