Peppe On 21.03.2017 17:08, Giuseppe Aruta wrote: > Hi Ede > 1) Thanks. I packed all german Kosmo language codes into a file. Very welcome > if you can complete it
will do > 2) I realized that old number formatting was generating a huge number of > decimals (14) on the coordinates (see drawing a Circle by radius). This fix > should have reduced the number of them.... I can see it dosn't happen so > often..... I'd better find another solution just checked the old code (draw circle by radius. msg in statusbar, left side) and it rounds/limits the decimals properly. can you check again, if your "hack" is really needed? ..ede > 2017-03-21 16:57 GMT+01:00 <edgar.sol...@web.de <mailto:edgar.sol...@web.de>>: > > Peppe, > > 1. > the german file is missing strings. do you want me create a proper one? > > 2. > what is the purpopse of the minor fix? why don't you use the proper > number formatting? > > ..ede > > On 21.03.2017 16:47, jump-pilot-...@lists.sourceforge.net > <mailto:jump-pilot-...@lists.sourceforge.net> wrote: > > Revision: 5392 > > http://sourceforge.net/p/jump-pilot/code/5392 > <http://sourceforge.net/p/jump-pilot/code/5392> > > Author: ma15569 > > Date: 2017-03-21 15:47:52 +0000 (Tue, 21 Mar 2017) > > Log Message: > > ----------- > > minor fix and added German file language > > > > Modified Paths: > > -------------- > > > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/utils/CoordinateListMetricsUtils.java > > > > Added Paths: > > ----------- > > > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/language/cadtoolbox_de.properties > > > > Added: > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/language/cadtoolbox_de.properties > > =================================================================== > > --- > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/language/cadtoolbox_de.properties > (rev 0) > > +++ > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/language/cadtoolbox_de.properties > 2017-03-21 15:47:52 UTC (rev 5392) > > @@ -0,0 +1,63 @@ > > +#cadtoolbox_de.properties > > +org.openjump.core.ui.CAD=CAD > > > +org.openjump.core.ui.CADEnableCheckFactory.exactly-{0}-features-must-be-selected=Genau > {0} Objekte m\\u00FCssen ausgew\\u00E4hlt sein > > > +org.openjump.core.ui.CADEnableCheckFactory.exactly-a-feature-must-be-selected=Genau > ein Objekt muss ausgew\\u00E4hlt sein > > +org.openjump.core.ui.CAD-tools=CAD Werkzeuge > > +org.openjump.core.ui.Cancel=Abbrechen > > +org.openjump.core.ui.config.CADToolsOptionsPanel=CAD Optionen > > +org.openjump.core.ui.Drawn=Gezeichnet > > +org.openjump.core.ui.Nearby=Neben > > +org.openjump.core.ui.plugins.Arc=Bogen zeichnen > > +org.openjump.core.ui.plugins.Circle=Kreis zeichnen > > +org.openjump.core.ui.plugins.Circle.by-radius=Kreis nach Radius > zeichnen > > +org.openjump.core.ui.plugins.Circle.Draw-with-the-mouse=Mit Maus > zeichnen > > +org.openjump.core.ui.plugins.Circle.End-angle=Endwinkel > > > +org.openjump.core.ui.plugins.Circle.Point-out-radius-and-position=Radius und > Position bestimmen > > +org.openjump.core.ui.plugins.Circle.Radius=Radius > > +org.openjump.core.ui.plugins.Circle.Start-angle=Anfangswinkel > > +org.openjump.core.ui.plugins.Circle.X=X > > +org.openjump.core.ui.plugins.Circle.Y=Y > > +org.openjump.core.ui.plugins.ExtendLinePlugIn=Linie ausdehnen > > > +org.openjump.core.ui.plugins.ExtendLinePlugIn.Extend-options=Ausdehnung - > Optionen > > +org.openjump.core.ui.plugins.MirrorPlugin=Symmetrie > > +org.openjump.core.ui.plugins.MirrorPlugin.Draw=Zeichnen > > +org.openjump.core.ui.plugins.MirrorPlugin.Select=Ausw\\u00E4hlen > > +org.openjump.core.ui.plugins.MirrorPlugin.Symmetry-options=Symmetrie - > Optionen > > +org.openjump.core.ui.plugins.ShortenLinePlugIn.Shorten-line=Linie > verk\\u00FCrzen > > > +org.openjump.core.ui.plugins.ShortenLinePlugIn.Shorten-options=Verk\\u00FCrzen > - Optionen > > +org.openjump.core.ui.tools.DrawLineStringCommandsTool.commands=Befehle > > > +org.openjump.core.ui.tools.DrawLineStringCommandsTool.draw-with-commands=Linie > anhand von Befehlen zeichnen > > +org.openjump.core.ui.tools.DrawSimpleLine.Draw-simple-line=Einfache > Linie zeichnen > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Absolute=Absolut > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Angle=Winkel > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Close=Abbrechen > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Draw-line=Erzeuge > Linie > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.End=Ende > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Length=L\\u00E4nge > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Length-{0}-angle-with-the-mouse-{1}=L\\u00E4nge > {0} Winkel mit der Maus {1} > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Length-and-angle=L\\u00E4nge > und Winkel > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Length-angle-with-the-mouse=L\\u00E4nge > (Winkel mit der Maus) > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.On-the-map=Auf > der Karte > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Relative=Relativ > > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Simple-line=Einfach > Linie > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Start=Anfang > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.X=X > > +org.openjump.core.ui.tools.DrawSimpleLine.SimpleLineDialog.Y=Y > > > +org.openjump.core.ui.tools.ExtendLinesAndCutWhereTheyTouchTool.An-editable-layer-must-exist=Es > muss eine editierbare Ebene existieren. > > > +org.openjump.core.ui.tools.ExtendLinesAndCutWhereTheyTouchTool.Expand-lines-until-crossing=Ausdehnung > > > +org.openjump.core.ui.tools.ExtendLinesAndCutWhereTheyTouchTool.Lines-do-not-cross=Die > ausgew\\u00E4hlten Objekte schneiden sich nicht > > +org.openjump.core.ui.tools.ExtendRectLineTool.Extend-line=Linie > ausdehnen > > > +org.openjump.core.ui.tools.ExtendRectLineTool.It-is-not-close-enough-to-a-line=Nicht > nah genug an einer Linie > > +org.openjump.core.ui.tools.Mirror=Spiegeln > > +org.openjump.core.ui.tools.MirrorLineTool.{0}-features={0} Objekte > > +org.openjump.core.ui.tools.MirrorLineTool.Mirror=Spiegeln > > +org.openjump.core.ui.tools.MirrorLineTool.No-selected-features=Keine > ausgew\\u00E4hlten Objekte > > > +org.openjump.core.ui.tools.MirrorLineTool.No-selected-features-exists-on-editing-layer=Es > existieren keine ausgew\\u00E4hlten Objekte in der editierbaren Ebene > > +org.openjump.core.ui.tools.ParalellLineTool=Paralell > > > +org.openjump.core.ui.tools.PerpendicularLineTool.Perpendicular=Senkrechte > > +org.openjump.core.ui.tools.RotateDialogTool.Rotate-by-given-angle=Nach > angegebenem Winkel drehen > > +org.openjump.core.ui.tools.RotateTool.Rotate=Drehen > > > +org.openjump.core.ui.tools.ShortenLineTool.Does-not-cross-any-line=Kreuzt > keine Linie > > > +org.openjump.core.ui.tools.ShortenLineTool.Error-while-shortening=Fehler > beim Verk\\u00FCrzen > > > +org.openjump.core.ui.tools.ShortenLineTool.Operation-result-is-not-valid=Ergebnis > ist ung\\u00FCltig > > +org.openjump.core.ui.tools.ShortenLineTool.Shorten-line=Linie > verk\\u00FCrzen > > > > > > Property changes on: > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/language/cadtoolbox_de.properties > > ___________________________________________________________________ > > Added: svn:mime-type > > ## -0,0 +1 ## > > +text/plain > > \ No newline at end of property > > Modified: > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/utils/CoordinateListMetricsUtils.java > > =================================================================== > > --- > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/utils/CoordinateListMetricsUtils.java > 2017-03-20 22:53:10 UTC (rev 5391) > > +++ > plug-ins/CADExtension/trunk/src/org/openjump/advancedtools/utils/CoordinateListMetricsUtils.java > 2017-03-21 15:47:52 UTC (rev 5392) > > @@ -1,7 +1,5 @@ > > package org.openjump.advancedtools.utils; > > > > -import java.text.DecimalFormat; > > - > > import org.openjump.advancedtools.language.I18NPlug; > > > > import com.vividsolutions.jts.geom.Coordinate; > > @@ -30,13 +28,18 @@ > > public static final String Measure = I18NPlug > > > .getI18N("org.openjump.core.ui.utils.CoordinateListMetrics.Measure"); > > > > - public static DecimalFormat df2 = new DecimalFormat("##0.0##"); > > + // public static DecimalFormat df2 = new DecimalFormat("##0.0##"); > > > > + public static double format(double d) { > > + return new Double(new Long(Math.round(d * 100)).doubleValue() > / 100.0D); > > + > > + } > > + > > public static String circleString(double a, double b, Coordinate > start, > > Coordinate target) { > > - String all = Coordinates + " [" + Center + start.x + "," + > start.y > > - + " - " + Target + target.x + "," + target.y + "] " + > Radius > > - + df2.format(a) + " " + Circum + df2.format(b); > > + String all = Coordinates + " [" + Center + start.x + ";" + > start.y > > + + " - " + Target + target.x + ";" + target.y + "] " + > Radius > > + + format(a) + " " + Circum + format(b); > > return all; > > > > } > > @@ -43,9 +46,9 @@ > > > > public static void setCircleMessage(double a, double b, Coordinate > start, > > Coordinate target) { > > - String all = Coordinates + " [" + Center + start.x + "," + > start.y > > - + " - " + Target + target.x + "," + target.y + "] " + > Radius > > - + df2.format(a) + " " + Circum + df2.format(b); > > + String all = Coordinates + " [" + Center + start.x + ";" + > start.y > > + + " - " + Target + target.x + ";" + target.y + "] " + > Radius > > + + format(a) + " " + Circum + format(b); > > > JUMPWorkbench.getInstance().getFrame().getContext().getLayerViewPanel() > > .getContext().setStatusMessage(all); > > } > > @@ -52,22 +55,19 @@ > > > > public static void setCircleHTMLFrame(double a, double b, > Coordinate start, > > Coordinate target) { > > - String all = Coordinates + " [" + Center + start.x + "," + > start.y > > - + " - " + Target + target.x + "," + target.y + "] " + > Radius > > - + df2.format(a) + " " + Circum + df2.format(b); > > HTMLFrame out = JUMPWorkbench.getInstance().getContext() > > .createPlugInContext().getOutputFrame(); > > out.createNewDocument(); > > out.addHeader(1, Measure); > > out.addHeader(2, Circle); > > - out.addHeader(3, Coordinates + " [" + Center + start.x + "," + > start.y > > - + " - " + Target + target.x + "," + target.y + "] "); > > - out.addHeader(3, Radius + df2.format(a)); > > - out.addHeader(3, Circum + df2.format(b)); > > + out.addHeader(3, Coordinates + " [" + Center + start.x + ";" + > start.y > > + + " - " + Target + target.x + ";" + target.y + "] "); > > + out.addHeader(3, Radius + format(a)); > > + out.addHeader(3, Circum + format(b)); > > } > > > > public static void setMessage(String aString, double a) { > > - String all = aString + df2.format(a); > > + String all = aString + format(a); > > > JUMPWorkbench.getInstance().getFrame().getContext().getLayerViewPanel() > > .getContext().setStatusMessage(all); > > } > > > > > > > ------------------------------------------------------------------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Jump-pilot-devel mailing list > > Jump-pilot-devel@lists.sourceforge.net > <mailto:Jump-pilot-devel@lists.sourceforge.net> > > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > <https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel> > > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Jump-pilot-devel mailing list > Jump-pilot-devel@lists.sourceforge.net > <mailto:Jump-pilot-devel@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > <https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel> > > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > > > _______________________________________________ > Jump-pilot-devel mailing list > Jump-pilot-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Jump-pilot-devel mailing list Jump-pilot-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel
