Hi Georgi, On the logs:
Feb 27 10:34:37 Ruse-R-Edge rshd[7431]: [EMAIL PROTECTED] as root: cmd='rcp -T -t /vat/tmp/juniper.conf1.gz' I believe there's a typo "/vat" here, which might cause the problem. Can you please check ? Cheers, Erdem On 2/28/07, Georgi Yalamov <[EMAIL PROTECTED]> wrote: > Hello, > > In addition to "slow commit" problem in same network, same devices and > JUNOS I must add some additional information. Actually the problem is > because of this configuration statement: > > [EMAIL PROTECTED] show system accounting > events [ login change-log interactive-commands ]; > destination { > tacplus { > server { > A.B.C.D { > secret "$7$skg7JKlo30Vo5369CAu"; ## SECRET-DATA > source-address X.X.X.X; > } > } > } > } > > > Without this tacacs accounting commit synchronize works normally. This > problem appears only to m320 with two routing engines, without > graceful-switchover and name-servers. > > Here is log message from re1 which is backup at this moment and do > commit sync on re0. > > % date > Tue Feb 27 12:50:36 EET 2007 > % tail -f /var/log/messages > Feb 26 10:40:26 Ruse-R-Edge mgd[6914]: UI_DBASE_LOGIN_EVENT: User > 'ilko' entering configuration mode > Feb 26 10:40:34 Ruse-R-Edge mgd[6914]: UI_DBASE_LOGOUT_EVENT: User > 'ilko' exiting configuration mode > Feb 26 10:40:58 Ruse-R-Edge mgd[7105]: UI_TACPLUS_ERROR: TACACS+ > failure: connect: timed out > Feb 26 10:41:01 Ruse-R-Edge mgd[7105]: UI_LOAD_EVENT: User 'root' is > performing a 'load update' > Feb 26 10:49:24 Ruse-R-Edge mgd[7105]: UI_COMMIT: User 'ilko' performed > commit: no comment > Feb 27 10:34:37 Ruse-R-Edge rshd[7431]: [EMAIL PROTECTED] as root: cmd='rcp > -T > -t /vat/tmp/juniper.conf1.gz' > Feb 27 12:49:06 Ruse-R-Edge mgd[7445]: UI_TACPLUS_ERROR: TACACS+ > failure: connect: timed out > Feb 27 12:49:09 Ruse-R-Edge mgd[7445]: UI_LOAD_EVENT: User 'root' is > performing a 'load update' > Feb 27 12:50:06 Ruse-R-Edge login: LOGIN_INFORMATION: User ilko logged > in from host re0 on device ttyp0 > Feb 27 12:50:09 Ruse-R-Edge mgd[7448]: UI_TACPLUS_ERROR: TACACS+ > failure: connect: timed out > > > This is commit without "system accounting " statements in configuration. > Feb 27 12:57:32 Ruse-R-Edge mgd[7445]: UI_COMMIT: User 'ilko' performed > commit: no comment > Feb 27 12:59:28 Ruse-R-Edge mgd[7663]: UI_LOAD_EVENT: User 'root' is > performing a 'load update' > Feb 27 12:59:28 Ruse-R-Edge mgd[7663]: UI_COMMIT: User 'ilko' performed > commit: no comment > > > Feb 27 13:00:09 Ruse-R-Edge mgd[7875]: UI_LOAD_EVENT: User 'root' is > performing a 'load update' > Feb 27 13:00:09 Ruse-R-Edge mgd[7875]: UI_COMMIT: User 'ilko' performed > commit: no comment > > > This seems to me that this is some kind of bug. I'll be grateful if > somebody can give an advice. > > > Kind regards, > > -- > George Yalamov > Bulgarian Telecommunications Company AD > Senior Engineer Core/Metro Technologies > > tel: 359 2 949 6844 > > > > > Vesselin Kostov wrote: > > Hello All, > > > > We have problem when commiting the configuration after we upgraded to JUNOS > > 8.1R1.5. > > > > It is taking about 8 minutes for commit: > > > > 2007-02-20 10:30:54 EET: push configuration to re1 2007-02-20 10:38:28 EET: > > asking re1 to commit > > > > With the old JUNOS the commit was taking less than 2 minutes: > > > > 2007-02-20 10:37:01 EET: push configuration to re1 2007-02-20 10:37:05 EET: > > asking re1 to commit > > > > Does anyone else had this problem or it is normal? > > > > > > > > [EMAIL PROTECTED] commit | display detail re0: 2007-02-20 10:30:50 EET: > > obtaining db lock on re1 > > 2007-02-20 10:30:53 EET: exporting juniper.conf 2007-02-20 10:30:53 EET: > > expanding groups 2007-02-20 10:30:53 EET: finished expanding groups > > 2007-02-20 10:30:53 EET: setup foreign files 2007-02-20 10:30:53 EET: > > propagating foreign files 2007-02-20 10:30:53 EET: complete foreign files > > 2007-02-20 10:30:53 EET: dropping unchanged foreign files 2007-02-20 > > 10:30:53 EET: executing 'ffp propagate' > > 2007-02-20 10:30:53 EET: daemons checking new configuration 2007-02-20 > > 10:30:53 EET: Routing protocol daemon checking new configuration 2007-02-20 > > 10:30:53 EET: Init daemon checking new configuration 2007-02-20 10:30:53 > > EET: Interface daemon checking new configuration 2007-02-20 10:30:53 EET: > > Pic Services Logging daemon checking new configuration 2007-02-20 10:30:54 > > EET: Web management daemon checking new configuration 2007-02-20 10:30:54 > > EET: Autoinstallation daemon checking new configuration configuration check > > succeeds 2007-02-20 10:30:54 EET: executing 'ffp synchronize' > > 2007-02-20 10:30:54 EET: push configuration to re1 2007-02-20 10:38:28 EET: > > asking re1 to commit > > re1: 2007-02-20 10:38:34 EET: exporting juniper.conf 2007-02-20 10:38:34 > > EET: expanding groups 2007-02-20 10:38:34 EET: finished expanding groups > > 2007-02-20 10:38:34 EET: setup foreign files 2007-02-20 10:38:34 EET: > > propagating foreign files 2007-02-20 10:38:35 EET: complete foreign files > > 2007-02-20 10:38:35 EET: dropping unchanged foreign files 2007-02-20 > > 10:38:35 EET: executing 'ffp propagate' > > 2007-02-20 10:38:35 EET: daemons checking new configuration 2007-02-20 > > 10:38:35 EET: Routing protocol daemon checking new configuration 2007-02-20 > > 10:38:35 EET: Init daemon checking new configuration 2007-02-20 10:38:35 > > EET: Interface daemon checking new configuration 2007-02-20 10:38:35 EET: > > Pic Services Logging daemon checking new configuration 2007-02-20 10:38:35 > > EET: Adaptive Services PIC daemon checking new configuration 2007-02-20 > > 10:38:35 EET: Web management daemon checking new configuration 2007-02-20 > > 10:38:35 EET: Autoinstallation daemon checking new configuration 2007-02-20 > > 10:38:35 EET: commit wrapup... > > 2007-02-20 10:38:35 EET: activating '/var/etc/init.inc' > > 2007-02-20 10:38:35 EET: updating '/var/etc/filters/filter-define.conf' > > 2007-02-20 10:38:35 EET: activating '/var/etc/master.passwd' > > 2007-02-20 10:38:36 EET: activating '/var/etc/rc.conf.inc' > > 2007-02-20 10:38:36 EET: activating '/var/etc/keyadmin.conf' > > 2007-02-20 10:38:36 EET: activating '/var/etc/sysids' > > 2007-02-20 10:38:36 EET: activating '/var/etc/login.conf' > > 2007-02-20 10:38:36 EET: activating '/var/etc/ttys' > > 2007-02-20 10:38:36 EET: activating '/var/etc/resolv.conf' > > 2007-02-20 10:38:36 EET: activating '/var/etc/hosts' > > 2007-02-20 10:38:36 EET: activating '/var/etc/group' > > 2007-02-20 10:38:36 EET: activating '/var/etc/pam.conf' > > 2007-02-20 10:38:36 EET: activating '/var/etc/pam_radius.conf' > > 2007-02-20 10:38:36 EET: activating '/var/etc/gtpcd.conf' > > 2007-02-20 10:38:36 EET: activating '/var/etc/certs' > > 2007-02-20 10:38:36 EET: activating '/var/etc/motd' > > 2007-02-20 10:38:36 EET: executing foreign_commands 2007-02-20 10:38:36 EET: > > /bin/sh /etc/rc.ui ui_setup_users (sh) 2007-02-20 10:38:36 EET: executing > > ui_commit in rc.ui 2007-02-20 10:38:37 EET: executing 'ffp activate' > > 2007-02-20 10:38:37 EET: copying configuration to juniper.save 2007-02-20 > > 10:38:37 EET: activating '/var/run/db/juniper.data' > > 2007-02-20 10:38:37 EET: notifying daemons of new configuration 2007-02-20 > > 10:38:37 EET: notifying mgd(1) 2007-02-20 10:38:37 EET: signaling > > 'Management daemon', pid 3948, signal 1, status 0 with notification errors > > enabled 2007-02-20 10:38:37 EET: notifying rpd(2) 2007-02-20 10:38:37 EET: > > cannot signal 'Routing protocol daemon', signal 1, no pid 2007-02-20 > > 10:38:37 EET: notifying init(4) 2007-02-20 10:38:37 EET: signaling 'Init > > daemon', pid 1, signal 1, status 0 with notification errors enabled > > 2007-02-20 10:38:37 EET: notifying dcd(9) 2007-02-20 10:38:37 EET: > > signaling 'Interface daemon', pid 3965, signal 1, status 0 with notification > > errors enabled 2007-02-20 10:38:37 EET: notifying fsad(22) 2007-02-20 > > 10:38:37 EET: cannot signal 'Pic Services Logging daemon', signal 1, no pid > > 2007-02-20 10:38:37 EET: notifying syslogd(29) 2007-02-20 10:38:37 EET: > > signaling 'Syslog daemon', pid 3810, signal 1, status 0 with notification > > errors enabled 2007-02-20 10:38:37 EET: notifying spd(30) 2007-02-20 > > 10:38:37 EET: cannot signal 'Adaptive Services PIC daemon', signal 1, no pid > > 2007-02-20 10:38:37 EET: notifying httpd(33) 2007-02-20 10:38:37 EET: > > cannot signal 'Web management daemon', signal 1, no pid commit complete > > re0: 2007-02-20 10:38:39 EET: commit wrapup... > > 2007-02-20 10:38:39 EET: activating '/var/etc/init.inc' > > 2007-02-20 10:38:39 EET: updating '/var/etc/filters/filter-define.conf' > > 2007-02-20 10:38:39 EET: activating '/var/etc/rc.conf.inc' > > 2007-02-20 10:38:39 EET: activating '/var/etc/keyadmin.conf' > > 2007-02-20 10:38:39 EET: activating '/var/etc/sysids' > > 2007-02-20 10:38:39 EET: activating '/var/etc/ttys' > > 2007-02-20 10:38:39 EET: activating '/var/etc/resolv.conf' > > 2007-02-20 10:38:39 EET: activating '/var/etc/hosts' > > 2007-02-20 10:38:39 EET: activating '/var/etc/pam.conf' > > 2007-02-20 10:38:39 EET: activating '/var/etc/pam_radius.conf' > > 2007-02-20 10:38:39 EET: activating '/var/etc/gtpcd.conf' > > 2007-02-20 10:38:39 EET: activating '/var/etc/certs' > > 2007-02-20 10:38:39 EET: executing foreign_commands 2007-02-20 10:38:39 EET: > > /bin/sh /etc/rc.ui ui_setup_users (sh) 2007-02-20 10:38:39 EET: executing > > ui_commit in rc.ui 2007-02-20 10:38:40 EET: executing 'ffp activate' > > 2007-02-20 10:38:40 EET: copying configuration to juniper.save 2007-02-20 > > 10:38:40 EET: activating '/var/run/db/juniper.data' > > 2007-02-20 10:38:40 EET: notifying daemons of new configuration 2007-02-20 > > 10:38:40 EET: notifying mgd(1) 2007-02-20 10:38:40 EET: signaling > > 'Management daemon', pid 3132, signal 1, status 0 with notification errors > > enabled 2007-02-20 10:38:40 EET: notifying rpd(2) 2007-02-20 10:38:40 EET: > > signaling 'Routing protocol daemon', pid 3157, signal 1, status 0 with > > notification errors enabled 2007-02-20 10:38:40 EET: notifying init(4) > > 2007-02-20 10:38:40 EET: signaling 'Init daemon', pid 1, signal 1, status 0 > > with notification errors enabled 2007-02-20 10:38:40 EET: notifying dcd(9) > > 2007-02-20 10:38:40 EET: signaling 'Interface daemon', pid 3152, signal 1, > > status 0 with notification errors enabled 2007-02-20 10:38:40 EET: > > notifying fsad(22) 2007-02-20 10:38:40 EET: signaling 'Pic Services Logging > > daemon', pid 3168, signal 1, status 0 with notification errors enabled > > 2007-02-20 10:38:40 EET: notifying syslogd(29) 2007-02-20 10:38:40 EET: > > signaling 'Syslog daemon', pid 2939, signal 1, status 0 with notification > > errors enabled 2007-02-20 10:38:40 EET: notifying httpd(33) 2007-02-20 > > 10:38:40 EET: cannot signal 'Web management daemon', signal 1, no pid > > commit complete > > > > [EMAIL PROTECTED] commit | display detail 2007-02-20 10:36:58 EET: > > obtaining db lock on re1 2007-02-20 10:37:01 EET: exporting juniper.conf > > 2007-02-20 10:37:01 EET: expanding groups 2007-02-20 10:37:01 EET: finished > > expanding groups 2007-02-20 10:37:01 EET: setup foreign files 2007-02-20 > > 10:37:01 EET: propagating foreign files 2007-02-20 10:37:01 EET: complete > > foreign files 2007-02-20 10:37:01 EET: dropping unchanged foreign files > > 2007-02-20 10:37:01 EET: daemons checking new configuration configuration > > check succeeds 2007-02-20 10:37:01 EET: push configuration to re1 2007-02-20 > > 10:37:05 EET: asking re1 to commit > > re1: commit complete > > 2007-02-20 10:37:16 EET: commit wrapup... > > 2007-02-20 10:37:16 EET: updating '/var/etc/filters/filter-define.conf' > > 2007-02-20 10:37:16 EET: activating '/var/etc/ifinfo.conf' > > 2007-02-20 10:37:16 EET: activating '/var/etc/gtpcd.conf' > > 2007-02-20 10:37:16 EET: activating '/var/etc/certs' > > 2007-02-20 10:37:16 EET: executing foreign_commands 2007-02-20 10:37:16 EET: > > /bin/sh /etc/rc.ui ui_setup_users (sh) 2007-02-20 10:37:16 EET: executing > > ui_commit in rc.ui 2007-02-20 10:37:17 EET: copying configuration to > > juniper.save 2007-02-20 10:37:17 EET: activating '/var/run/db/juniper.data' > > 2007-02-20 10:37:17 EET: notifying daemons of new configuration 2007-02-20 > > 10:37:17 EET: signaling 'Interface daemon', pid 7184, signal 1, status 0 > > with notification errors enabled 2007-02-20 10:37:17 EET: signaling 'Routing > > protocol daemon', pid 7155, signal 1, status 0 with notification errors > > enabled 2007-02-20 10:37:17 EET: signaling 'MIB2 daemon', pid 7154, signal > > 1, status 0 with notification errors enabled 2007-02-20 10:37:17 EET: > > signaling 'Sonet APS daemon', pid 7156, signal 1, status 0 with notification > > errors enabled 2007-02-20 10:37:17 EET: signaling 'VRRP daemon', pid 7157, > > signal 1, status 0 with notification errors enabled 2007-02-20 10:37:17 EET: > > signaling 'PFE daemon', pid 7189, signal 1, status 0 with notification > > errors enabled 2007-02-20 10:37:17 EET: signaling 'Traffic sampling control > > daemon', pid 7158, signal 1, status 0 with notification errors enabled > > 2007-02-20 10:37:17 EET: signaling 'IPSec Key Management daemon', pid 7188, > > signal 1, status 0 with notification errors enabled 2007-02-20 10:37:17 EET: > > signaling 'Forwarding UDP daemon', pid 7163, signal 1, status 0 with > > notification errors enabled 2007-02-20 10:37:17 EET: signaling 'Adaptive > > Services PIC daemon', pid 7170, signal 1, status 0 with notification errors > > enabled 2007-02-20 10:37:17 EET: signaling 'SDX daemon', pid 7175, signal 1, > > status 0 with notification errors enabled 2007-02-20 10:37:17 EET: signaling > > 'Redundancy device daemon', pid 7178, signal 1, status 0 with notification > > errors enabled commit complete > > > > Thanks, > > > > Vesko > > > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp