I'm getting a 404 on the URL below. Does anyone have a copy of L3VPN_migration.zip that they can share?
Thanks. On Thu, Mar 16, 2006 at 10:00:43PM +0100, Andre Stiphout wrote: > > Nice example on inet.0/vrf route exchange: > <http://www.apricot2006.net/slides/tutorial/tuesday/L3VPN_migration.zip> > > cheers, andre > > On Thu, 16 Mar 2006 21:42:10 +0100, Rick Wilkerson > <[EMAIL PROTECTED]> wrote: > > > Some good information in the feature guide section of the documentation > > on > > simplifed instance sharing. Harshit is absolutely correct, however > > there is > > a solution shown there using a rib table in addition to auto-export. > > > > Rick > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Harshit Kumar > > Sent: Thursday, March 16, 2006 1:57 PM > > To: Rafal Szarecki (WA/EPO); Mellott, Eric; juniper-nsp@puck.nether.net > > Subject: Re: [j-nsp] Exporting inet.0 BGP routes into a VRF instance > > > > BTW, auto-export is not going to work between inet.0 and a vrf. > > It works between VRFs. > > > > -harshit > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] On Behalf Of Rafal > >> Szarecki (WA/EPO) > >> Sent: Wednesday, March 15, 2006 2:02 PM > >> To: Mellott, Eric; juniper-nsp@puck.nether.net > >> Subject: Re: [j-nsp] Exporting inet.0 BGP routes into a VRF instance > >> > >> There is at least few way to do this. > >> > >> One of then can be use of route-target community in global routing > >> table and VRF. Then "auto-export" has to be used. I never try this, > >> but gives hope to simple configuration. > >> > >> Other option is use of rib-group xxxx [inet.0 vprname.inet.0], and > >> then run BGP on this group xxxx, with policy. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp