Jonas, try proto connections. If it works, be happy. :) Been there, did that, just did the same, but actually worked.
-ako On Thu, 10 May 2007 14:27:53 +0200, Jonas Frey wrote: > Hello, > > i am trying to configure local-switching via l2circuits. > Config is pretty straight-forward: > > local-switching { > interface ae0.28 { > end-interface { > interface ge-1/1/0.3; > } > (both interfaces are vlan tagged with the same vlan) > > However this doesnt work. Via show l2circuit connections i get: > Local Switch ae0.28 > Interface Type St Time last up # Up > trans > ae0.28(vc 0) rmt NP > > NP seems to be h/w not present. But the interfaces are there...isnt it > possible to switch subinterfaces and/or vlan-tagged interfaces? > > Regards, > Jonas Frey _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp