Hello Hamid, As far as I know if you configure no-cspf then the router will not run cspf to set up the LSP. This means that no administrative factors will be taken into account and the LSP will follow the IGP path. I used it (thanks to a tip from this list) to establish rsvp lsp across ospf areas.
I'm not a big expert on this, so you might want to hear a second opinion. As for ospf traffic engineering, it is meant to enable ospf to carry the additional information required for TE (mainly link bandwidth). Regards Amos On May 19, 2007, at 6:38 PM, Hamid Ahmed wrote: > Hi all, > Can anyone explain me the following please : > > 1) what are consequences of if i donot define no-cspf command > while i configure a explicit LSP configuration with ERO consttraints ? > 2) what is the purpose of ospf traffic engineering ? > > Best regards, > HA > > > --------------------------------- > You snooze, you lose. Get messages ASAP with AutoCheck > in the all-new Yahoo! Mail Beta. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp