Hello,
How do you get those BGP routes that you are trying to export?
Are they being sent when there is no policy at all?
Regards
Amos
On Jul 1, 2007, at 7:41 AM, Stephen Fulton wrote:
> Hi all,
>
> I'm having an issue exporting routes to iBGP peers. I am able to
> import
> routes from my iBGP peers fine, but not export.
>
> I have tried several variations on policy statements which effect
> exactly what is being exported, but without the intended result
> (exporting a full table). Below I have included one that is now being
> used. The result is the exporting of directly connected interface
> routes.
>
> -- Start --
>
> policy-statement iBGP-ADVERTISE-FULL-ROUTING-TABLE {
> term 1 {
> from protocol ospf;
> then reject;
> }
> term 2 {
> then accept;
> }
> }
>
> -- End --
>
> I am filtering routes learned from OSPF to simplify the trouble
> shooting
> process. If I remove term 1, the OSPF routes are re-advertised to my
> iBGP peers. I have tried adding:
>
> -- Start --
>
> [...]
> term 1.5 {
> from protocol ospf;
> then accept
> }
>
> -- End --
>
> Without success.
>
> Any ideas?
>
> -- Stephen.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
