On Sat, Sep 01, 2007 at 08:55:26AM -0400, Eric Van Tol wrote: > Does the MX960 DPCE-R support 100/1000BaseX/T or just 1000BaseX/T? Also > what does enhanced Layer 2 features does this DPC have over the DPC-R? > VPLS scaling?
The DPC-E is the exact same thing as the DPC (for both 40x1G and 4x10GE), but with a newer rev EZchip with a larger microcode capacity. I'm sure at some point not having it will ass you out of some layer 2 features somewhere down the road, but they're still rolling out the L2 features in 8.4+ so for the moment it's the same thing. Since this only affects the EZchip there are no differences in traditional Juniper features (same I-Chip 3.0 on both boards), so VPLS should be unaffected. I believe the Triton and Bellini cards are all rev B EZchips, so only the first gen Atlas cards will have the -E variant. And no AFAIk they don't do 100M. :) -- Richard A Steenbergen <[EMAIL PROTECTED]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp