Sven, All memeber of LAG has to be on same Line Module. Line module is front card - this wihtout interfaces. In exception of E320 and E120, LM has 1:1 relationship to LM. So, members of LAG has to be on single IOA.
For E320 and E120, LM can host two half-high IOA. Then LAG can span between this two IOA, but not between LMs. in other words, slot number in memeber-link name has to be same for all LAG memebers. 2007/9/4, Sven Juergensen (KielNET) <[EMAIL PROTECTED]>: > > Hi list, > > the JUNOSe 8.1 documentation at > http://tinyurl.com/2aclxy > section "Configuring Ethernet > Interfaces" states: > > "To create the links in the LAG bundles, you can add one or more > Ethernet physical interfaces to it. The LACP detects Ethernet interfaces > as links if they are configured on the same line module and have the > same physical layer characteristics. The LACP also assigns to the LAG > bundle the same MAC address of the Ethernet link with the highest port > priority, which is the lowest value." > > Does this mean that i can use the > transceiver of two ERX-GIGESFP-IOAs > each to create a 2GBps Full Duplex LAG? > > Thanks and best regards, > > sven03 > > -- > Mit freundlichen Gruessen > > i. A. Sven Juergensen > > Fachbereich > Informationstechnologie > > KielNET GmbH > Gesellschaft fuer Kommunikation > Preusserstr. 1-9, 24105 Kiel > > Telefon : 0431 / 2219-053 > Telefax : 0431 / 2219-005 > E-Mail : [EMAIL PROTECTED] > Internet: http://www.kielnet.de > > AS# 25295 > Key fingerprint: > 65B6 90FC 010A 39CE DCA5 336D 9C45 3B7A B02D E132 > > Geschaeftsfuehrer Eberhard Schmidt > HRB 4499 (Amtsgericht Kiel) > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Rafał Szarecki JNCIE-M/T, JNCIP-E +48602418971 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp