Hi, If you are pinging _from the router_, you should be able to see your icmp traffic with 'monitor traffic a/b/c.x' command.
If rip updates are all you see, I'd say you're using another egress interface than ge-0/0/1 for your destination. You may check this with show route x.x.x.x and see your next-hop. Hope this helps, Erdem On 9/5/07, M.Mihailidis <[EMAIL PROTECTED]> wrote: > hello guys i want to monitor a interface to see what source address it is > using when i try to ping a certain address > i used "monitor traffic interface ge-0/0/1 extensive" > and all i got was the rip routing updates as output. > any suggestions? > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp