Hi Ras I believe this kind of card is able to run only at 100Mbps full or half. see: http://www.juniper.net/techpubs/hardware/m7i/m7i-pic/frameset.html
Saying that the PE-12FE-TX is the only able to run at 10M or 100M I have already had the same problem as you. If you have some M7i with integral FE interfaces you will be able to run at 10M on these integrated interfaces. regards Alain Ras a écrit : >I've just tried to set a port on an PE-4FE-TX to 10m (set interfaces >fe-0/0/1 speed 10m). This works fine on our PE-12FE-TX and the 'commit >check' says all is well, but when I commit I get: > >/kernel: %KERN-2: fe-0/0/1: Illegal media change: invalid speed > >Are these 100m only ports? If not, what else might be wrong? > >Thanks, >Ras >_______________________________________________ >juniper-nsp mailing list juniper-nsp@puck.nether.net >https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
