Hi, Different units of the same physical interface cannot be in different logical routers. You can configure vlans in a logical router, but the whole physical port has to be assigned.
Cheers, Erdem On 9/19/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Can the interfaces be logical interfaces or must they be physical? > > I'm curious if I could divide up VLANs on an ethernet interface into > different, segregated, logical routers... > > ----- Original Message ----- > From: Eric Van Tol <[EMAIL PROTECTED]> > Date: Wednesday, September 19, 2007 12:50 pm > Subject: [j-nsp] Logical routers > To: juniper-nsp@puck.nether.net > > > Can anyone tell me which release started supporting complete > > segregationof logical-routers with regard to configuration and > > show commands? I > > upgraded a router from 8.0 to 8.4 today and noticed that now when > > doing'set cli logical-router', I can only see the interfaces > > belonging to > > that logical-router and configure only that logical-router. I looked > > through the release notes, but can't find it, so maybe I'm looking in > > the wrong spot. > > > > I love this enhancement, by the way. Thumbs up! > > > > -evt > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp