Forgive me for jumping in, but since L2VPN and L3VPN are different NLRIs,
during import process on receiving PE router, there should not be confusion
between L3 and L2 VPNs; thus same RT for both L3 and L2 services should work
just fine.
HTH,
Senad
----- Original Message ----
From: P.Narayana Swamy <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Cc: juniper-nsp@puck.nether.net
Sent: Thursday, September 27, 2007 6:13:32 PM
Subject: [j-nsp] RE- RT configuration for L2 VPN and L3 VPN
Hi Monika,
Each VRF needs a unique RT( Either L2 or L3 VPN
),since it imports the route based on the RT
community.
Regards,
Swamy
Should the route target be unique if a set of PEs
provide both VPLS and
L3
VPN services?
To be more elaborate,
PE(rs)-1-------------------------------------------------------PE(rs)-2
I have one L2 VPN and L3 VPN configured in PE1 and
PE2. Can I use same
route-target for L2 VPN and L3 VPN?
Regards,
Monika
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
____________________________________________________________________________________
Check out the hottest 2008 models today at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
