Dear all, Many thanks for your replys.
I am waiting under this condition with no-autonego setting a littile more. My center's default setting is "auto-nego". I will suggest "no-auto-negotiation" for default setting. Many thanks On Oct 17, 2007, at 12:27 AM, Sabri Berisha wrote: > On Tue, Oct 16, 2007 at 09:18:30AM -0600, Brandon Bennett wrote: > > Hi, > >> When using 10 or 100. There is no such thing at 1000-half (at least >> defined in the standard). > > That's, correct. However, the following config is valid: > > ge-0/0/3 { > speed 100m; > link-mode full-duplex; > gigether-options { > no-auto-negotiation; > } > unit 0 { > family inet { > address 10.0.3.2/24; > } > } > } > > When linked to another ge interface, you get: > > ge-5/0/3 { > unit 0 { > family inet { > address 10.0.3.1/24; > } > } > } > > Autonegotiation information: > Negotiation status: No-autonegotiation > Link partner: > Link mode: Half-duplex, Flow control: None, Remote fault: OK, > Link partner Speed: 100 Mbps > > > Thanks, > > -- > Sabri _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp